No top end
- moke
-
Topic Author
- Offline
- User
-

Registered
- Been there, done that, still doing it!
- Posts: 30
- Thanks: 0
No top end
05 Oct 2011 17:58
Hi I came across a cheap 80 KZ250ltd and it has a few quirks. It ran great for a week then I let the bike sit a couple weeks, now it doesn't like to rev up towards 10k like it used to and has less and less top end as you go through the gears. Ive cleaned out the carbs (almost spotless) plugs a little rich but not too bad, no vacuum leaks that i can find. A buddy of mine said to check the spark advancer? Any input from the wise buke gurus?
It's not what you ride it's that you ride!
1980 Kawasaki KZ250 LTD (current project)
1978 Honda CB400
1987 Honda Elite 50 (speed project)
1980 Kawasaki KZ250 LTD (current project)
1978 Honda CB400
1987 Honda Elite 50 (speed project)
Please Log in or Create an account to join the conversation.
- KZQ
-
- Online
- Administrator
-

Registered
- Walking Behind the Corn May Not Be All That!
- Posts: 5044
- Thanks: 1957
Re: No top end
05 Oct 2011 18:20 - 05 Oct 2011 18:24
Spark advance would be a good place to start.
We always like pics of your bike.
Also it would help if you would add some details to your profile.
Why don't you list the year and model of your ride in the signature line, it's part of your profile.
Bill
We always like pics of your bike.
Also it would help if you would add some details to your profile.
Why don't you list the year and model of your ride in the signature line, it's part of your profile.
Bill
www.KZ1300.com
Riders:
1968 BSA 441 Shooting Star, 1970 BSA 650 Lightning, 1974 W3, 1976 KZ900, 1979 KZ750 Twin, 1979 KZ750 Twin Trike, 1981 KZ1300, 1982 KZ1100 Spectre, 2000 Honda Valkyrie, 2009 Yamaha Roadliner S. 1983 Honda GL 1100
Projects:
1985 ZN1300
Riders:
1968 BSA 441 Shooting Star, 1970 BSA 650 Lightning, 1974 W3, 1976 KZ900, 1979 KZ750 Twin, 1979 KZ750 Twin Trike, 1981 KZ1300, 1982 KZ1100 Spectre, 2000 Honda Valkyrie, 2009 Yamaha Roadliner S. 1983 Honda GL 1100
Projects:
1985 ZN1300
Last edit: 05 Oct 2011 18:24 by KZQ.
Please Log in or Create an account to join the conversation.
- moke
-
Topic Author
- Offline
- User
-

Registered
- Been there, done that, still doing it!
- Posts: 30
- Thanks: 0
Re: No top end
06 Oct 2011 01:40
Tried playing with the carb, checked valve clearance and whatnot and took it for a ride. Noticed now that while at higher rpm (6-8k) it feels as if the engine is "catching up" can hear and feel it pull harder in this range then completely dies off if I shift into 4th or try to get it past 8k rpm. Ill get some pics up if I can in the afternoon tomorrow
It's not what you ride it's that you ride!
1980 Kawasaki KZ250 LTD (current project)
1978 Honda CB400
1987 Honda Elite 50 (speed project)
1980 Kawasaki KZ250 LTD (current project)
1978 Honda CB400
1987 Honda Elite 50 (speed project)
Please Log in or Create an account to join the conversation.
- clutch
-
- Offline
- User
-

Registered
- I wish I had a tad more patience to do it better!
- Posts: 1051
- Thanks: 13
Re: No top end
06 Oct 2011 05:16 - 06 Oct 2011 05:16moke wrote: plugs a little rich but not too bad
Running rich can cause hesitation in the top end.
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
Last edit: 06 Oct 2011 05:16 by clutch.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: No top end
06 Oct 2011 09:49
Have you been into the Ignition cover on the side of the head? This is where the points and condenser live as well as the advancer your friend was talking about. Do you have a service manual? It will explain how to check the point gap, the Ignition timing, and servicing the advancer assy. Probably needs the points/ condenser kit, and clean/ lube the advancer, proper point gap, and timing. Then It will run like a 250 again.
Have you checked to see if the Air Filter is clean and not blocked?
Have you checked to see if the Air Filter is clean and not blocked?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Please Log in or Create an account to join the conversation.
- moke
-
Topic Author
- Offline
- User
-

Registered
- Been there, done that, still doing it!
- Posts: 30
- Thanks: 0
Re: No top end
06 Oct 2011 12:02
forunately my advancer doesnt look quite like that! I have a service manual that came with the bike is anyone aware of a good points condenser kit these look a little old, as in 1980
. Or would a kit meant for the same year kz100 work due to my engine being 1/4 of that?
It's not what you ride it's that you ride!
1980 Kawasaki KZ250 LTD (current project)
1978 Honda CB400
1987 Honda Elite 50 (speed project)
1980 Kawasaki KZ250 LTD (current project)
1978 Honda CB400
1987 Honda Elite 50 (speed project)
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: No top end
06 Oct 2011 12:22
www.z1enterprises.com/Ignition-Points--K...Z200-KZ250-4441.aspx
Z1 has the points, but I don't see a condenser. Email, or call them.
Z1 has the points, but I don't see a condenser. Email, or call them.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: No top end
06 Oct 2011 12:46moke wrote: Tried playing with the carb, checked valve clearance and whatnot and took it for a ride. Noticed now that while at higher rpm (6-8k) it feels as if the engine is "catching up" can hear and feel it pull harder in this range then completely dies off if I shift into 4th or try to get it past 8k rpm. Ill get some pics up if I can in the afternoon tomorrow
Perhaps fuel starvation due to obstructed tank venting.
If not already done, could test-run with the fuel tank cap ajar (which assures venting).
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- moke
-
Topic Author
- Offline
- User
-

Registered
- Been there, done that, still doing it!
- Posts: 30
- Thanks: 0
Re: No top end
06 Oct 2011 18:38
ok found some history on the bike the two weeks where I didn't ride it found out my friend had used it and laid it down on the gravel and knocked the contact cover and assembly loose he screwed it in and it ran ok according to him. Played with the plate some and come out that the timing was veryyyyy retarded, backfiring no power so i advanced it slightly and it works better now to figure out how to time it with the service manual
It's not what you ride it's that you ride!
1980 Kawasaki KZ250 LTD (current project)
1978 Honda CB400
1987 Honda Elite 50 (speed project)
1980 Kawasaki KZ250 LTD (current project)
1978 Honda CB400
1987 Honda Elite 50 (speed project)
Please Log in or Create an account to join the conversation.
- clutch
-
- Offline
- User
-

Registered
- I wish I had a tad more patience to do it better!
- Posts: 1051
- Thanks: 13
Re: No top end
06 Oct 2011 20:05moke wrote: ok found some history on the bike the two weeks where I didn't ride it found out my friend had used it and laid it down on the gravel and knocked the contact cover and assembly loose he screwed it in and it ran ok according to him. Played with the plate some and come out that the timing was veryyyyy retarded, backfiring no power so i advanced it slightly and it works better now to figure out how to time it with the service manual
That should be an easy fix, and doesn't require you buying new parts. You will need a timing light to do it right. If you don't have one, I just bought a basic one on ebay a few weeks ago for about $20. It doesn't have all the fancy gauges built in, but it does what you need it to do.
~Clutch
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: No top end
06 Oct 2011 23:37
set the Gap of the points, then time the spark firing. If you have no timing light, you can do it Statically. Either a test light, or Volt Ohm Meter, you can even lay the plug against the head. Turn the motor so the "F" mark lines up, then turn the points plate so the points are closed, then back to where they just open. You can even see the spark between the point contacts.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
