Timing chain help...
- Cruez
-
Topic Author
- Offline
- User
-

Registered
- Posts: 14
- Thanks: 0
Timing chain help...
06 Oct 2011 14:53
Ok, I found my problem. Somehow I had a bent valve...no marks on the piston or the valve... not sure what happened..
Here is my dilemna. I took the cams out without having it set at TDC. (don't know where my head was.) I did mark the cams and chain. I also forgot about locking the tensioner.
Now, I am pretty sure the chain did not go slack on the crank.. It's tied up. To be on the safe side, is there a way to put it back together, checking to be sure the timing is going to be correct? Can you see the marks on the crank by taking off the pan? Would it be safe to reset the timing completely ??
Thoughts?
Here is my dilemna. I took the cams out without having it set at TDC. (don't know where my head was.) I did mark the cams and chain. I also forgot about locking the tensioner.
Now, I am pretty sure the chain did not go slack on the crank.. It's tied up. To be on the safe side, is there a way to put it back together, checking to be sure the timing is going to be correct? Can you see the marks on the crank by taking off the pan? Would it be safe to reset the timing completely ??
Thoughts?
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
-

Vendors
- Posts: 7442
- Thanks: 796
Re: Timing chain help...
06 Oct 2011 14:55
it will be fine.
do you have a manual?
what bike do you have?
leon
do you have a manual?
what bike do you have?
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- Cruez
-
Topic Author
- Offline
- User
-

Registered
- Posts: 14
- Thanks: 0
Re: Timing chain help...
06 Oct 2011 16:24 - 06 Oct 2011 16:25
'80 KZ1000. I have a clymer manual, not a factory one.
Last edit: 06 Oct 2011 16:25 by Cruez.
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: Timing chain help...
06 Oct 2011 16:55
Turn the engine over clockwise with your 17mm wrench on the right end of the crank until the "T" mark for cylinders 1-4 is aligned with the pointer. You can do this with no cams, just hold the camchain and let it turn with the crank. After this follow the instructions in the manual for cam installation paying close attention to using the "CORRECT" timing marks. Reset the camchain tensioner to recessed. Should be in the manual.
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- Cruez
-
Topic Author
- Offline
- User
-

Registered
- Posts: 14
- Thanks: 0
Re: Timing chain help...
07 Oct 2011 01:16
Is there a way to check the crank marker with the chain, in case it slipped. I don't think it did, but it would make me feel better.
Please Log in or Create an account to join the conversation.
- Gary - K7GLD
-
- Offline
- User
-

Registered
- 1983 1100LTD
- Posts: 135
- Thanks: 17
Re: Timing chain help...
07 Oct 2011 22:33
No chain "timing mark" - the only timing of importance is the crankshaft and camshaft(s)...
John Day area - Eastern Oregon
Restored 1983 Kawasaki 1100LTD
Restored 1983 Kawasaki 1100LTD
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Timing chain help...
08 Oct 2011 14:01 - 08 Oct 2011 14:04
just make sure the chain is indeed on the crank gear and not alongside of it. which link is on which tooth is not important untill u install the intake cam. the manual will tell u to couunt the # of chain pins between certain cam sprocket markings.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 08 Oct 2011 14:04 by mark1122.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
