Engine rebuild questions
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Engine rebuild questions
09 Oct 2011 02:10its very hard to get paint to stick to aluminum engine parts,im not sure what suzuki uses at the factory but its one of the few paints ive actually seen stick :woohoo:gwolever wrote: Thanks for the input guys. That will be helpful come Monday when I start putting it all together
...and you're a funny guy wireman. That was a good one.
I wasn't going to paint, but when I decided to JB weld a couple of broken fins I decided to get the aluminum paint. I really like the way it turned out. I'm hoping the black, aluminum, and polished pieces look sharp when I add my black Jet-hot coated headers. Can't wait to get her all finished.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- clutch
-
- Offline
- User
-

Registered
- I wish I had a tad more patience to do it better!
- Posts: 1051
- Thanks: 13
Re: Engine rebuild questions
09 Oct 2011 03:07gwolever wrote: I have heard some people actually use the blue thread lock for certain bolts on their engines? What do you guys who have done this before suggest?
I use the blue thread lock religiously on my engine sprocket cover bolts. I lost all four while riding after not using it years ago, and couldn't operate my clutch properly. I will never get stranded again for making that mistake! As for the rest of the bolts, others would know better than I!
~Clutch
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Engine rebuild questions
09 Oct 2011 10:34 - 09 Oct 2011 10:37
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 09 Oct 2011 10:37 by Old Man Rock.
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- gwolever
-
Topic Author
- Offline
- User
-

Registered
- Posts: 237
- Thanks: 8
Re: Engine rebuild questions
10 Oct 2011 23:53
Thanks for all the help guys. Making this a pretty easy rebuild with your input.
Old Man Rock...that copper spray sealant is awesome stuff. Helped a lot.
I gad ordered some aluminum billet cam end plugs to replace the older rubber ones. Got them out today and not only do they not fit, but they didn't have a hole in them for the end valve cover bolts to go through. WTF!
So anybody have any suggestions? should I just get the replacement rubber ones, or does anyone know of some aluminum billet ones that will actually fit my 82?
Here are a couple of pics after working on it today( I put the valve cover on without the plugs):
Old Man Rock...that copper spray sealant is awesome stuff. Helped a lot.
I gad ordered some aluminum billet cam end plugs to replace the older rubber ones. Got them out today and not only do they not fit, but they didn't have a hole in them for the end valve cover bolts to go through. WTF!
So anybody have any suggestions? should I just get the replacement rubber ones, or does anyone know of some aluminum billet ones that will actually fit my 82?
Here are a couple of pics after working on it today( I put the valve cover on without the plugs):
Attachment 017.JPG not found
Attachment 018_2011-10-10.JPG not found
Attachment 019_2011-10-10.JPG not found
1982 KZ1000 CSR
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Engine rebuild questions
10 Oct 2011 23:59
There are two different type of Kawasaki Kz1000 engines, what you've got is the "J" version with the cam plugs having bolts through them.
Read this:
www.aperaceparts.com/tech/techkz1000.html
Read this:
www.aperaceparts.com/tech/techkz1000.html
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- gwolever
-
Topic Author
- Offline
- User
-

Registered
- Posts: 237
- Thanks: 8
Re: Engine rebuild questions
11 Oct 2011 00:03
Damn! Thanks MFolks. That would have been good to know before ordering some from ebay couple months ago.
Thanks again. Now I know what to look for.
Thanks again. Now I know what to look for.
1982 KZ1000 CSR
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Engine rebuild questions
11 Oct 2011 00:06
Don't be afraid to ask about these old bikes,there are many here, and on other forums with the correct answers....
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Engine rebuild questions
11 Oct 2011 01:10
get the replacement rubber ones,glue them in and forget about them
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
