started smoking
- 79kz1000*
-
Topic Author
- Offline
- User
-

Registered
- Posts: 89
- Thanks: 1
started smoking
08 Oct 2011 22:11
So I went riding today an noticed that its smoking now when I get on the gas. It iis white smoke!! Would it mean the rings???
79 kz 1000 ltd
76 kz 900
76 kz 900
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: started smoking
08 Oct 2011 23:20
usually if it starts to smoke under a load its rings,if it smokes when you back off throttle its guides/seals
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: started smoking
09 Oct 2011 10:01
Notice anything different in performance such as loss of power, fouled plugs, oil out the exhaust etc...
Recent Tune Up (valve clearances-ignition timing etc...) accomplished?
Oil level too high?
Recent Tune Up (valve clearances-ignition timing etc...) accomplished?
Oil level too high?
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- loudhvx
-
- Offline
- KZr Legend
-

Registered
- Posts: 10863
- Thanks: 1622
Re: started smoking
09 Oct 2011 13:18
If it's oil, it should have a very light blue tint to the white smoke.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Kz550 valve train warning.
Other links.
Please Log in or Create an account to join the conversation.
- 79kz1000*
-
Topic Author
- Offline
- User
-

Registered
- Posts: 89
- Thanks: 1
Re: started smoking
10 Oct 2011 14:58
It does I'm going to do a compression check tonight an see where that goes. What should the compression psi be for that bike???
79 kz 1000 ltd
76 kz 900
76 kz 900
Please Log in or Create an account to join the conversation.
- 79kz1000*
-
Topic Author
- Offline
- User
-

Registered
- Posts: 89
- Thanks: 1
Re: started smoking
10 Oct 2011 15:42
Does anyone know what the valve clearance should be for that 79 kz 1000 ltd b3????
79 kz 1000 ltd
76 kz 900
76 kz 900
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: started smoking
10 Oct 2011 16:06
id say between 10-12 on the exhuast and between 5-8 on the intakes would put you in the ballpark,much tighter on the exhuast and you risk burning a valve.
as far as compression goes it would probably run with anything above 100 in all 4 cylinders,135-140 would be a better number though with all cylinders within 5psi of each other.
as far as compression goes it would probably run with anything above 100 in all 4 cylinders,135-140 would be a better number though with all cylinders within 5psi of each other.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: started smoking
10 Oct 2011 16:11
alright just looked up the compression test in the manual it says 100psi on the low side and 128-156 on the good side with up to 14psi differance which i personally think is way too much between cylinders myself
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- 79kz1000*
-
Topic Author
- Offline
- User
-

Registered
- Posts: 89
- Thanks: 1
Re: started smoking
10 Oct 2011 19:48
Thanks guys I just did compression check an 1 trough four went 95,100,110,120 . Low compression that's for sure
79 kz 1000 ltd
76 kz 900
76 kz 900
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: started smoking
10 Oct 2011 20:00
yeah sounds like its time for a 1075 kit and a valve job
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- 79kz1000*
-
Topic Author
- Offline
- User
-

Registered
- Posts: 89
- Thanks: 1
Re: started smoking
11 Oct 2011 08:56
does anybody know of a good shop around west virginia that does head work???
79 kz 1000 ltd
76 kz 900
76 kz 900
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: started smoking
11 Oct 2011 15:21
larry cavanaugh 1-570-396-1440
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
