clutch pushrod

  • crackfox1
  • crackfox1's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 27
  • Thanks: 0

clutch pushrod

10 Oct 2011 09:07
#482308
Hello all, I recently purchased a gearbox from a 76 chain driven z1000 to exchange the output gear on my 79 z1000st. Anyway's, I bought the whole gearbox and noticed the push-rods were'nt the same. Was it just the shafty's that had aluminium push-rod's with steel end's ? The one out of the earlier gearbox is all steel and of a smaller diameter. Any idea's ? Thank you. simon.

Please Log in or Create an account to join the conversation.

  • martin_csr
  • martin_csr's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7993
  • Thanks: 1648

Re: -

10 Oct 2011 10:38 - 15 Feb 2013 11:44
#482324
.
Last edit: 15 Feb 2013 11:44 by martin_csr.

Please Log in or Create an account to join the conversation.

  • crackfox1
  • crackfox1's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 27
  • Thanks: 0

Re: clutch pushrod

10 Oct 2011 14:13
#482343
Cheer's for that info martin. The reason I'm asking is that I've got to make a longer one up (as the shafty's push-rod is shorter) and I've got a steel rod the right size but am unsure whether it matter's that it's all steel Thank you. simon.

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: clutch pushrod

10 Oct 2011 15:28
#482350
I've read that drill rod can be used as a push rod for the clutch. Drill rod is the steel shaft used to make drill bits, and come in many sizes and types of metal.

www.wttool.com/index/page/category/categ..._source=SiteChampion
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum