No compression

  • gotakz
  • gotakz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 28
  • Thanks: 0

No compression

11 Oct 2011 16:19
#482573
I just put a 1000 bottom end under the 1000 top end that I had on my kz900....first thing noticed was the valve cover did not go on unless I dropped the engine down. next when everything was all ready to crank I have no compression. the head is the same one that came off and the bike ran before it came off. I put oil in the cylinder and cranked still no comp. what could I have done or what could have happened that makes no compression.....I'm all most ready to sell it or just part the bike out please any ideas? Thanks in advance
1976 Kz900-A4
Had a 1985 Gpz750

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: No compression

11 Oct 2011 16:24
#482574
gotakz wrote: I just put a 1000 bottom end under the 1000 top end that I had on my kz900....first thing noticed was the valve cover did not go on unless I dropped the engine down. next when everything was all ready to crank I have no compression. the head is the same one that came off and the bike ran before it came off. I put oil in the cylinder and cranked still no comp. what could I have done or what could have happened that makes no compression.....I'm all most ready to sell it or just part the bike out please any ideas? Thanks in advance

What was the reason for taking the engine apart?
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: No compression

11 Oct 2011 16:30
#482576
Read this about the Kz1000 engine differences:
www.aperaceparts.com/tech/techkz1000.html
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • RonKZ650
  • RonKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3719
  • Thanks: 252

Re: No compression

11 Oct 2011 17:27
#482583
Check your valve clearances. You may have assembled using the wrong reference marks on the camshafts. If valve clearances are big, you have some bent valves. Very common.
321,000 miles on KZ's that I can remember. Not going to see any more.
The following user(s) said Thank You: wireman

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: No compression

11 Oct 2011 22:56
#482649
RonKZ650 wrote: Check your valve clearances. You may have assembled using the wrong reference marks on the camshafts. If valve clearances are big, you have some bent valves. Very common.

Yep, you bent valves.
KD9JUR

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: No compression

11 Oct 2011 23:41
#482667
Bummer!! :sick:
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: No compression

12 Oct 2011 02:02
#482700
either camshaft timing is off or bent valves.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • gotakz
  • gotakz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 28
  • Thanks: 0

Re: No compression

12 Oct 2011 12:06
#482750
Thanks ....I'm hoping I got the timing off I'll check it out after work today..
1976 Kz900-A4
Had a 1985 Gpz750

Please Log in or Create an account to join the conversation.

  • etbike3135
  • etbike3135's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 379
  • Thanks: 50

Re: No compression

12 Oct 2011 17:09
#482789
I would think you could have some compression even with the cams off timing. I think its like 2 or 3 teeth off and the motor wont turn over with out hitting the valves.
I think you should be more detailed about the diagnosis. Can you give a compression reading?
1973 Kawasaki Z1
18 years in dragbikes

Please Log in or Create an account to join the conversation.

  • Gary - K7GLD
  • Gary - K7GLD's Avatar
  • Offline
  • User
  • User
    Registered
  • 1983 1100LTD
  • Posts: 135
  • Thanks: 17

Re: No compression

12 Oct 2011 22:59
#482838
etbike3135 wrote: I would think you could have some compression even with the cams off timing. I think its like 2 or 3 teeth off and the motor wont turn over with out hitting the valves.
I think you should be more detailed about the diagnosis. Can you give a compression reading?

UMMmmmmm - IF he had compression to measure, this thread wouldn't be here... :laugh:
John Day area - Eastern Oregon
Restored 1983 Kawasaki 1100LTD

Please Log in or Create an account to join the conversation.

  • P21
  • P21's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 471
  • Thanks: 34

Re: No compression

12 Oct 2011 23:33
#482853
just asking not being smart

how did you set the rings?
you did not line up all ring gaps by chance did you?

just asking
Kawasaki KZ 1000 Police (2002) P21

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: No compression

13 Oct 2011 01:09
#482871
no compression as in complete absense of? B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum