transmition?

  • miller
  • miller's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 24
  • Thanks: 0

transmition?

11 Oct 2011 19:49
#482597
rode fine this morning on the way to work, started her up and started riding home got about a half mile down the road at a stop light and put her in neutral. dropped her down in first and now the gears (none of them) will fully engage? what may have happened?
KZ650 C-1

Please Log in or Create an account to join the conversation.

  • clutch
  • clutch's Avatar
  • Offline
  • User
  • User
    Registered
  • I wish I had a tad more patience to do it better!
  • Posts: 1051
  • Thanks: 13

Re: transmition?

11 Oct 2011 20:14
#482609
Not sure what you mean by gears not fulling engaging, but it sounds more like clutch slippage than a transmission problem to me.
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)

Please Log in or Create an account to join the conversation.

  • miller
  • miller's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 24
  • Thanks: 0

Re: transmition?

11 Oct 2011 20:24
#482610
I can hear the gears turning inside.
KZ650 C-1

Please Log in or Create an account to join the conversation.

  • clutch
  • clutch's Avatar
  • Offline
  • User
  • User
    Registered
  • I wish I had a tad more patience to do it better!
  • Posts: 1051
  • Thanks: 13

Re: transmition?

11 Oct 2011 20:27
#482611
Is it rideable, or can you not get the gears to grab at all?
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)

Please Log in or Create an account to join the conversation.

  • miller
  • miller's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 24
  • Thanks: 0

Re: transmition?

11 Oct 2011 21:43
#482631
i cant ride it, they wont grab
KZ650 C-1

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: transmition?

11 Oct 2011 22:16
#482639
:unsure: Clutch push rod adjustment? :unsure:

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • clutch
  • clutch's Avatar
  • Offline
  • User
  • User
    Registered
  • I wish I had a tad more patience to do it better!
  • Posts: 1051
  • Thanks: 13

Re: transmition?

11 Oct 2011 22:29
#482642
I am still thinking it may be a clutch issue. Go with Patton's idea and check the push rod adjustment first. Then you might want to check the clutch springs for wear, before tearing down the engine and splitting the case to inspect the transmission.
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)

Please Log in or Create an account to join the conversation.

  • RonKZ650
  • RonKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3719
  • Thanks: 252

Re: transmition?

11 Oct 2011 23:15
#482652
Clutch pushrod does not go out of adjustment at a stop light most likely :) If you mean you are in eternal neutral and can not engage any gears to move, this means the nut has fallen off the countershaft sprocket. Take off the sprocket cover on the left side of your engine and find you have the nut missing and the sprocket has slipped out off the splines. This always happens during deceleration.
321,000 miles on KZ's that I can remember. Not going to see any more.

Please Log in or Create an account to join the conversation.

  • JR
  • JR's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
    Registered
  • Posts: 2981
  • Thanks: 500

Re: transmition?

11 Oct 2011 23:28
#482658
RonKZ650 wrote: Clutch pushrod does not go out of adjustment at a stop light most likely :) If you mean you are in eternal neutral and can not engage any gears to move, this means the nut has fallen off the countershaft sprocket. Take off the sprocket cover on the left side of your engine and find you have the nut missing and the sprocket has slipped out off the splines. This always happens during deceleration.

+1
Listen to Ron
1980 kz750E1, Delkevic exhaust

Please Log in or Create an account to join the conversation.

  • JR
  • JR's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
    Registered
  • Posts: 2981
  • Thanks: 500

Re: transmition?

11 Oct 2011 23:28
#482659
RonKZ650 wrote: Clutch pushrod does not go out of adjustment at a stop light most likely :) If you mean you are in eternal neutral and can not engage any gears to move, this means the nut has fallen off the countershaft sprocket. Take off the sprocket cover on the left side of your engine and find you have the nut missing and the sprocket has slipped out off the splines. This always happens during deceleration.

+1
Listen to Ron
1980 kz750E1, Delkevic exhaust

Please Log in or Create an account to join the conversation.

  • clutch
  • clutch's Avatar
  • Offline
  • User
  • User
    Registered
  • I wish I had a tad more patience to do it better!
  • Posts: 1051
  • Thanks: 13

Re: transmition?

11 Oct 2011 23:32
#482660
JR wrote:
RonKZ650 wrote: Clutch pushrod does not go out of adjustment at a stop light most likely :) If you mean you are in eternal neutral and can not engage any gears to move, this means the nut has fallen off the countershaft sprocket. Take off the sprocket cover on the left side of your engine and find you have the nut missing and the sprocket has slipped out off the splines. This always happens during deceleration.

+1
Listen to Ron

Yes, this could most certainly be the problem as well. I've had this happen to me before.
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum