Piston slap slap slappety...
- TeK9iNe
-
Topic Author
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Piston slap slap slappety...
12 Oct 2011 22:04
My old J has developed a nice case of piston slap... :pinch:
Soon as I can, I'll get some A/V of it. It's especially bad when starting from dead cold (morning/first start of the day).
I've heard the J motors were known for developing more cases of slap because of the use of generic parts binning instead of matching up parts the way they had done years before.
Oh well - compression is still good and she runs like a top after a couple minutes.
Soon as I can, I'll get some A/V of it. It's especially bad when starting from dead cold (morning/first start of the day).
I've heard the J motors were known for developing more cases of slap because of the use of generic parts binning instead of matching up parts the way they had done years before.
Oh well - compression is still good and she runs like a top after a couple minutes.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- KZ_Rage
-
- Offline
- User
-

Registered
- Kentucky Bourbon Barrel Ale
- Posts: 891
- Thanks: 19
Re: Piston slap slap slappety...
12 Oct 2011 22:16 - 12 Oct 2011 22:16
You sure that wouldn't be due to any redlining now would it? Naw of course not! Just ridden to church every Sunday! :whistle:
Sorry couldn't resist, well look on the bright side, at least you know what you will be doing over those cold winter months! :side:
Sorry couldn't resist, well look on the bright side, at least you know what you will be doing over those cold winter months! :side:
1979 KZ1000E1 SOLD!
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)
Last edit: 12 Oct 2011 22:16 by KZ_Rage.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Piston slap slap slappety...
12 Oct 2011 22:30
Time to up size? Go 1100cc or bigger? Sometime a low mile 1100 top end shows on Feebay for reasonable. Always a risk whatever you buy used though. Lots of bucks to go with a big bore kit and the machine work, gotta love the bike a lot.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
Topic Author
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Piston slap slap slappety...
12 Oct 2011 22:52
Yeah, just mild riding... :evil:
I do love the bike, but I'm not sure if I'll shell the $$$ for a while yet.
I think I'll just keep flogging it next season till things start to rattle while its hot.
Then again 1100 would be nice... or 1170... :lol:
I do love the bike, but I'm not sure if I'll shell the $$$ for a while yet.
I think I'll just keep flogging it next season till things start to rattle while its hot.
Then again 1100 would be nice... or 1170... :lol:
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Piston slap slap slappety...
13 Oct 2011 00:41
fill it full of thick oil and think happy thoughts! :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- jms3257
-
- Offline
- User
-

Registered
- Posts: 37
- Thanks: 1
Re: Piston slap slap slappety...
14 Oct 2011 11:42
I have known some really old-timer mechanics, and I remember them talking about knurling the piston skirt to increase their size to eliminate piston slap. I have done this on valve guides as a cheap fix, but never done pistons.
Jim:
Jim:
1980 KZ1000 LTD
Been away from riding for way too long, enjoying the journey back.
Been away from riding for way too long, enjoying the journey back.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Piston slap slap slappety...
14 Oct 2011 14:24
yep thats old used car lot trickery there! :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
-

Registered
- Attack life, it's only trying to kill you.
- Posts: 3673
- Thanks: 83
Re: Piston slap slap slappety...
14 Oct 2011 14:45jms3257 wrote: I have known some really old-timer mechanics, and I remember them talking about knurling the piston skirt to increase their size to eliminate piston slap. I have done this on valve guides as a cheap fix, but never done pistons.
Jim:
I have heard of this one, but never seen it myself. Kind of like peening the top of a threaded hole to make a loose thread gauge properly. :whistle:
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Piston slap slap slappety...
14 Oct 2011 16:27 - 14 Oct 2011 17:07
i wouldn’t wait too long.
i had a noisy piston in a 2 stroke Blaster 4 wheeler. it ended up dropping a piece of the pistons skirt into the bottom end in a short while. then i had to replace every bearing in the motor and trany, just to be sure there wasnt any bits in them.
i had a noisy piston in a 2 stroke Blaster 4 wheeler. it ended up dropping a piece of the pistons skirt into the bottom end in a short while. then i had to replace every bearing in the motor and trany, just to be sure there wasnt any bits in them.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 14 Oct 2011 17:07 by mark1122.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Piston slap slap slappety...
14 Oct 2011 16:41mark1122 wrote: i wouldn’t wait too long.
i had a noisy piston in a 2 stroke Blaster 4 wheeler. it ended up dropping a piece of the pistons skirt into the bottom end in a short while.
+1 I once had a BSA piston skirt break up. It looked like someone stepped on a potato chip. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Piston slap slap slappety...
14 Oct 2011 18:19
amateurs! :laugh: i put 5 pistons and some rods through the side/bottem of sb chevy 1 time! :evil: :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- KZ_Rage
-
- Offline
- User
-

Registered
- Kentucky Bourbon Barrel Ale
- Posts: 891
- Thanks: 19
Re: Piston slap slap slappety...
14 Oct 2011 18:35wireman wrote: amateurs! :laugh: i put 5 pistons and some rods through the side/bottem of sb chevy 1 time! :evil: :woohoo:
"Inside out" or the harder to do "outside in"? :lol:
1979 KZ1000E1 SOLD!
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
