Port and Polish
- gwolever
-
Topic Author
- Offline
- User
-

Registered
- Posts: 237
- Thanks: 8
Port and Polish
16 Oct 2011 23:42
Hey guys. I was just wondering if the port and polish job on intake / exhaust is something that can be done with engine pulled and fully assembled or if the head/valves/valve guides need to be removed?
Is it possible to grind and remove debris with vac and compressed air without removing head, etc. or not?
Thanks.
Is it possible to grind and remove debris with vac and compressed air without removing head, etc. or not?
Thanks.
1982 KZ1000 CSR
Please Log in or Create an account to join the conversation.
- elfmagic17
-
- Offline
- User
-

Registered
- Posts: 334
- Thanks: 24
Re: Port and Polish
17 Oct 2011 00:10
No, to get a proper port job done right you need to work in the valve pocket areas too. This means the head must come off and valves out.
Kenny Hicks
74 Honda CB550
75 Honda CB360 (runs and rides good but not a show bike)
77 KZ650B1 (Runs Great, but needs painted and a little work.)
74 Honda CB550
75 Honda CB360 (runs and rides good but not a show bike)
77 KZ650B1 (Runs Great, but needs painted and a little work.)
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
-

Vendors
- Posts: 7442
- Thanks: 796
Re: Port and Polish
17 Oct 2011 12:06elfmagic17 wrote: No, to get a proper port job done right you need to work in the valve pocket areas too. This means the head must come off and valves out.
this is correct.
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- toad
-
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
Re: Port and Polish
17 Oct 2011 21:09
save yourself the headache, tear it apart
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
Please Log in or Create an account to join the conversation.
- gwolever
-
Topic Author
- Offline
- User
-

Registered
- Posts: 237
- Thanks: 8
Re: Port and Polish
17 Oct 2011 21:47
Thanks guys. I figured that was probably the case. I plan to get a piston kit in the next year or so, so I will just do it when I tear it apart again.
One less thing to do before this spring I guess.
One less thing to do before this spring I guess.
1982 KZ1000 CSR
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
