custom 4-1 - most likely bad idea... thoughts?
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
custom 4-1 - most likely bad idea... thoughts?
19 Oct 2011 18:02
So, its getting that time of year when the weather gets cooler, the riding decreases and I get the itch to customize something, usually for the worst, not better 
Anyway, been thinking of trying to make a 4 into 1 for my 82 550. I don't want to spend the money on an aftermarket one. I'd be ok with an old beat up one to play around with, but I haven't come accross one yet.
So, I was thinking of picking up a beat up stock exhaust and modifying it. I have a few ideas... The very crude paint brush photo below shows an aerial view of the exhuast, with the right being the headers and the red the new pipe. My first idea was to cut the pipes just upstream of the crossover and just have a pipe going across collecting the exhaust from all 4 headers, which would head to the read in 1 larger pipe to a homemade muffler. The second option is cutting the mufflers off (leave the crossover) and just having a larger pipe collect the already combined 4-2.
I'm not worried about the fabrication of it, but I'm thinking that cylinders 1 and 2 would have more backpressure than 3 and 4 because of the longer pipe run. I thought maybe I could alleviate this by running large enough collection pipe to make sure backpressure wouldn't be applied until the muffler.
What are your guys thoughts on something like this? Leave well enough alone?
Anyway, been thinking of trying to make a 4 into 1 for my 82 550. I don't want to spend the money on an aftermarket one. I'd be ok with an old beat up one to play around with, but I haven't come accross one yet.
So, I was thinking of picking up a beat up stock exhaust and modifying it. I have a few ideas... The very crude paint brush photo below shows an aerial view of the exhuast, with the right being the headers and the red the new pipe. My first idea was to cut the pipes just upstream of the crossover and just have a pipe going across collecting the exhaust from all 4 headers, which would head to the read in 1 larger pipe to a homemade muffler. The second option is cutting the mufflers off (leave the crossover) and just having a larger pipe collect the already combined 4-2.
I'm not worried about the fabrication of it, but I'm thinking that cylinders 1 and 2 would have more backpressure than 3 and 4 because of the longer pipe run. I thought maybe I could alleviate this by running large enough collection pipe to make sure backpressure wouldn't be applied until the muffler.
What are your guys thoughts on something like this? Leave well enough alone?
Please Log in or Create an account to join the conversation.
- mtbspeedfreak
-
- Offline
- User
-

Registered
- Posts: 1413
- Thanks: 36
Re: custom 4-1 - most likely bad idea... thoughts?
19 Oct 2011 18:12
Quick reply while at work, but another member, DutchZ, made a custom 4-into-1 exhaust for his CRAZY awesome bike.
Check out his build thread sometime, I forget what page the exhaust write up is on- you'll find it informative. kzrider.com/forum/11-projects/189636-dut...=20&start=440#479400
Check out his build thread sometime, I forget what page the exhaust write up is on- you'll find it informative. kzrider.com/forum/11-projects/189636-dut...=20&start=440#479400
2000 ZRX 1100
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
