Engine Removal - What do I Need to Know?
- PaulyWally
-
Topic Author
- Offline
- User
-

Registered
- Total Bike Newbie
- Posts: 71
- Thanks: 0
Engine Removal - What do I Need to Know?
22 Oct 2011 14:49 - 22 Oct 2011 16:21
Well... it looks like I might be needing to remove the engine. I went to replace the transmission cover, and didn't realize the frame was in the way. So I guess I might as well take the engine in the house and give her some loving this winter.
What do I need to know? About how heavy is she going to be (750cc)? Can one person do it? Tips? Tricks? Warnings? Fragmented thoughts?
Thanks
What do I need to know? About how heavy is she going to be (750cc)? Can one person do it? Tips? Tricks? Warnings? Fragmented thoughts?
Thanks
1976 KZ750 Twin
Last edit: 22 Oct 2011 16:21 by PaulyWally. Reason: typo
Please Log in or Create an account to join the conversation.
- clutch
-
- Offline
- User
-

Registered
- I wish I had a tad more patience to do it better!
- Posts: 1051
- Thanks: 13
Re: Engine Removal - What do I Need to Know?
22 Oct 2011 15:04PaulyWally wrote: Well... it looks like I might be needing to remove the engine. I went to replace the transmission cover, and didn't realize the frame was in the way. So I guess I might as well take the engine in the house and give her some loving this winter.
What do I need to know? About how heavy is she going to be (750ci)? Can one person do it? Tips? Tricks? Warnings? Fragmented thoughts?
Thanks
You're best bet is to follow the steps in your repair manual. I just took the motor out of my '66 A1 and had no issues following the steps (though it didn't tell me to disconnect spark plug wires lol!). If you don't have a manual yet, I highly recommend getting one. You can usually find a decent used copy on eBay for a fair price, and occasionally you will have a helpful member post a link to download one. (unfortunately I only know where to find the 750 -4cyl manual)
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Engine Removal - What do I Need to Know?
22 Oct 2011 15:28750ci? :blink: must be one hell of a bigblock chevy youre working on! :woohoo:PaulyWally wrote: Well... it looks like I might be needing to remove the engine. I went to replace the transmission cover, and didn't realize the frame was in the way. So I guess I might as well take the engine in the house and give her some loving this winter.
What do I need to know? About how heavy is she going to be (750ci)? Can one person do it? Tips? Tricks? Warnings? Fragmented thoughts?
Thanks
wrap the frame to keep from banging it up ,put a floor jack under the motor to get it started then pull it out.
removing the exhuast studs does help for a little extra clearance
i can remove a 900/1000 engine by myself,but im between 5'10"205-6'6"230 depending on what conveniance store im leaving. :laugh:
reinstalling is a lot easier with 2 people if bike is on wheels
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Engine Removal - What do I Need to Know?
22 Oct 2011 16:06PaulyWally wrote: Well... it looks like I might be needing to remove the engine. I went to replace the transmission cover, and didn't realize the frame was in the way. So I guess I might as well take the engine in the house and give her some loving this winter.
What do I need to know? About how heavy is she going to be (750ci)? Can one person do it? Tips? Tricks? Warnings? Fragmented thoughts?
Thanks
Before even thinking about pulling the engine consult the Kawasaki service manual! It will give you step by step instructions, but more importantly, it will tell you IF the engine needs to be pulled to do the work you plan. I am amazed if that is really necesssary, but I guess anything is possible. BUT check manual before getting yourself in deep doo doo. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- PaulyWally
-
Topic Author
- Offline
- User
-

Registered
- Total Bike Newbie
- Posts: 71
- Thanks: 0
Re: Engine Removal - What do I Need to Know?
22 Oct 2011 16:21 - 22 Oct 2011 16:23wireman wrote: 750ci? must be one hell of a bigblock chevy youre working on!
Gargantuan.
(fixed... :laugh:)
clutch & 650ed wrote: ...service manual...
Yup. I've already got me one of those and I'm following it. But I was just looking for practical tips, advice, and thoughts that the manual doesn't touch on. :shrug:
I was also thinking about painting the frame right away. But... now that I'm thinking about it, maybe I can take care of the transmission cover by just jacking up the engine an inch or two and then setting it back in place. I really don't know if I want to remove the engine this year.
1976 KZ750 Twin
Last edit: 22 Oct 2011 16:23 by PaulyWally.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Engine Removal - What do I Need to Know?
22 Oct 2011 17:02
Be sure to check the Kawasaki manual. It should have a section titled "Disassembly - Engine Installed." There it tells you how to remove the mission cover with the engine still in the bike (or at least mine does for the KZ650). Looking at the diagram on Kawasaki.com the KZ750 twin mission cover is very similar in size and shape to the KZ650, so you should not need to raise the engine at all. Also, notice the warning in the manual regarding pulling on the shift rod or you'll be taking the whole engine apart trying to put the shift forks back on! Good luck. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- PaulyWally
-
Topic Author
- Offline
- User
-

Registered
- Total Bike Newbie
- Posts: 71
- Thanks: 0
Re: Engine Removal - What do I Need to Know?
22 Oct 2011 19:25650ed wrote: It should have a section titled "Disassembly - Engine Installed." There it tells you how to remove the mission cover with the engine still in the bike (or at least mine does for the KZ650).
That would be really great if I didn't have to remove the engine. But I'm not seeing anything in the service manual under "Engine" for removing the transmission cover. And when I look under "Transmission - Disassembly" the very first instruction is to remove the engine. :S So everything after that is moot.
Kawasaki.com doesn't seem to recognize the VIN I have on my title. So I can't see a parts diagram on their website to compare. But I can tell you what's preventing the mission cover from coming off, and maybe you can tell me if the 650 is that different:
As I pull the cover straight off, it does not clear the shift rod before it bumps into the frame. So either the engine must be raised an inch or two so the mission cover can clear the frame... or the shift rod must come out with the mission cover.
Make sense? I can post some pics if it'll help.
1976 KZ750 Twin
Please Log in or Create an account to join the conversation.
- stonemaster
-
- Offline
- User
-

Registered
- Sorry I wasnt paying attention
- Posts: 24
- Thanks: 0
Re: Engine Removal - What do I Need to Know?
22 Oct 2011 23:20 - 22 Oct 2011 23:23
try taking the engine bolts out and jacking motor up a little, of course strap the bike down, and have someone to help steady it, seems strange though that one would have to remove the entire engine to get off a cover pics would help though cause dat dont seem right
jus ridin my Rickshaw baby, among other things
Last edit: 22 Oct 2011 23:23 by stonemaster.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Engine Removal - What do I Need to Know?
23 Oct 2011 00:04PaulyWally wrote:650ed wrote: It should have a section titled "Disassembly - Engine Installed." There it tells you how to remove the mission cover with the engine still in the bike (or at least mine does for the KZ650).
That would be really great if I didn't have to remove the engine. But I'm not seeing anything in the service manual under "Engine" for removing the transmission cover. And when I look under "Transmission - Disassembly" the very first instruction is to remove the engine. :S So everything after that is moot.
Kawasaki.com doesn't seem to recognize the VIN I have on my title. So I can't see a parts diagram on their website to compare. But I can tell you what's preventing the mission cover from coming off, and maybe you can tell me if the 650 is that different:
As I pull the cover straight off, it does not clear the shift rod before it bumps into the frame. So either the engine must be raised an inch or two so the mission cover can clear the frame... or the shift rod must come out with the mission cover. Make sense? I can post some pics if it'll help.
Pics would help. But, for starters, you don't need a VIN to use the Kawasaki.com parts diagrams. Just go to "owners Info" and at the drop down menu click on "Parts Diagrams." Click "Continue" next to "Motorcycle." Select the year (1976) and CC (750) and click on continue. In box 3 of the drop down click on "Click here to chose." On the next page that appears under "Vehicle Information" click on "parts diagrams." That should bring up a new window for all the diagrams for the KZ750-B1.
If you have the Kawasaki Service Manual does it have a section titled "Disassembly - Engine Installed?" If so, look in that section until you see instructions for removing the engine sprocket. After the sprocket instructions the next set of instructions should discuss removal of the External Shift Mechanism (gear shift shaft, etc) and this should include instructions for removing the mission cover. Your bike's configuration looks very similar to the KZ650 so I am hopeful that the mission cover will come off the same way. Disassembling the transmission is a different animal, but the mission cover removal is covered separately for the KZ650 as I described and doesn't require the tranny to be disturbed since it only covers the external shift mechanism. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Engine Removal - What do I Need to Know?
23 Oct 2011 00:13 - 23 Oct 2011 00:14
If engine removal is required --
Might prefer (using padding, old tires, soft grass, or whatever) -- after removing fuel tank, battery and sidecovers -- lay bike down on its side; remove engine mounting bolts (and anything else in the way); then lift the frame up and off the engine.
Good Fortune!
Might prefer (using padding, old tires, soft grass, or whatever) -- after removing fuel tank, battery and sidecovers -- lay bike down on its side; remove engine mounting bolts (and anything else in the way); then lift the frame up and off the engine.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 23 Oct 2011 00:14 by Patton.
Please Log in or Create an account to join the conversation.
- PaulyWally
-
Topic Author
- Offline
- User
-

Registered
- Total Bike Newbie
- Posts: 71
- Thanks: 0
Re: Engine Removal - What do I Need to Know?
23 Oct 2011 00:47 - 23 Oct 2011 01:19
OK. I got it.
I found the section in the service manual. It was right where 650ed said it was. My problem was that I hadn't first removed the clutch push rod. And that was preventing me from pivoting the transmission cover in order to clear the frame.
But when I do that, it doesn't even list a 1976 KZ750. It starts with 1977. :huh: That's why I was trying the VIN.
Weird.
I found the section in the service manual. It was right where 650ed said it was. My problem was that I hadn't first removed the clutch push rod. And that was preventing me from pivoting the transmission cover in order to clear the frame.
650ed wrote: you don't need a VIN to use the Kawasaki.com parts diagrams. Just go to "owners Info" and at the drop down menu click on "Parts Diagrams." Click "Continue" next to "Motorcycle." Select the year (1976) and CC (750) and click on continue. In box 3 of the drop down click on "Click here to chose."
But when I do that, it doesn't even list a 1976 KZ750. It starts with 1977. :huh: That's why I was trying the VIN.
Weird.
1976 KZ750 Twin
Last edit: 23 Oct 2011 01:19 by PaulyWally.
Please Log in or Create an account to join the conversation.
- clutch
-
- Offline
- User
-

Registered
- I wish I had a tad more patience to do it better!
- Posts: 1051
- Thanks: 13
Re: Engine Removal - What do I Need to Know?
23 Oct 2011 03:23PaulyWally wrote:clutch & 650ed wrote: ...service manual...
Yup. I've already got me one of those and I'm following it.
Good man! Can't be that much of a "total bike newbie" if you're doing that! :woohoo:
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
