Header coating and clamp-on muffler advice
- Archiddeon
-
Topic Author
- Offline
- User
-

Registered
- Posts: 114
- Thanks: 1
Header coating and clamp-on muffler advice
23 Oct 2011 00:18 - 23 Oct 2011 00:19
No eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configurationThe 1983 GPz 550 I'm working on has 4-to-1 headers and muffler mounted on the right-hand side. The headers are in decent shape (rusted, but no holes and seem solid enough) but the muffler has rusted right through and the baffles have disintegrated. As such I'm looking to get a clamp-on muffler. Planning to cut off the old one and bolt on the new one.
Searching on eBay, there seem to be quite a few ranging from $30 upwards. Are the cheaper ones, such as
any good? Or are they "cheap and nasty"? How do the different designs (length, diameter, taper) affect funtionality ... sound, performance, etc.?
Also, any advice on how to protect the headers to inhibit further rusting? A friend recommended fireplace paint, but seems kinda sketchy.
Thanks
Searching on eBay, there seem to be quite a few ranging from $30 upwards. Are the cheaper ones, such as
any good? Or are they "cheap and nasty"? How do the different designs (length, diameter, taper) affect funtionality ... sound, performance, etc.?
Also, any advice on how to protect the headers to inhibit further rusting? A friend recommended fireplace paint, but seems kinda sketchy.
Thanks
1983 GPz 550
1985 Honda CH150 Scooter
1995 Suzuki GS500E
1985 Honda CH150 Scooter
1995 Suzuki GS500E
Last edit: 23 Oct 2011 00:19 by Archiddeon.
Please Log in or Create an account to join the conversation.
- ramtough_63
-
- Offline
- User
-

Registered
- Posts: 2560
- Thanks: 136
Re: Header coating and clamp-on muffler advice
23 Oct 2011 00:36
I have used after market mufflers in the past and liked them.(my sampson slip ons were almost 400 on my Harley) I beleave plasticoat makes a cereamic header paint I painted my rusty collector with and it worked great gonna use it on the header if I cant afford a new chrome one. on my winter build.
1978 KZ1000 A2
Thrown Together To Ride Til Winter
Facebook Page
Free Range Custom Art
1982/83 750R/GPZ
1984 Goldwing 1200 Interstate
1982 Yamahopper QT50
Previous
2 79 HD sporty XLH
02 HD FLSTS Heritage
60's HD Hummer
70's Honda 550 Four
70 Yamaha 100
and various enduros dirtbikes minibikes etc...
Thrown Together To Ride Til Winter
Facebook Page
Free Range Custom Art
1982/83 750R/GPZ
1984 Goldwing 1200 Interstate
1982 Yamahopper QT50
Previous
2 79 HD sporty XLH
02 HD FLSTS Heritage
60's HD Hummer
70's Honda 550 Four
70 Yamaha 100
and various enduros dirtbikes minibikes etc...
Please Log in or Create an account to join the conversation.
- stonemaster
-
- Offline
- User
-

Registered
- Sorry I wasnt paying attention
- Posts: 24
- Thanks: 0
Re: Header coating and clamp-on muffler advice
23 Oct 2011 00:46
its actually called grill paint as in outdoor grill/smoker and its good stuff, VHT makes good header paint too, sand it down with 80 grit ( VHT's recommendation) and spray away with either
jus ridin my Rickshaw baby, among other things
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Header coating and clamp-on muffler advice
24 Oct 2011 01:28
Get it powder coated if you want to keep it decent. I used VHT for about 20 years. You have to redo it every couple of years, you have to heat cure it or it falls off, and it doesn't protect from rust all that well. It's better than nothing, but not much.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- Archiddeon
-
Topic Author
- Offline
- User
-

Registered
- Posts: 114
- Thanks: 1
Re: Header coating and clamp-on muffler advice
25 Oct 2011 01:24
I think for the first version I'll use VHT. Then budget to get the frame and headers powder coated together 
One problem I noticed with those clamp-on mufflers ... most fit 1.5" - 1.75". I just measured the "collector pipe" (i.e. the single pipe that the four headers connect into) and it's a touch over 2" :blink:
Any suggestions?
The exhaust system on now is an old Kerker ... I'm quite annoyed that the PO let it rust so badly that it has to be replaced, but hey. Do these usually have much larger pipes than "normal"? Is there some sort of adapter I can get to reduce it down to 1.75", or just hunt for a bigger muffler?
Thanks
One problem I noticed with those clamp-on mufflers ... most fit 1.5" - 1.75". I just measured the "collector pipe" (i.e. the single pipe that the four headers connect into) and it's a touch over 2" :blink:
Any suggestions?
The exhaust system on now is an old Kerker ... I'm quite annoyed that the PO let it rust so badly that it has to be replaced, but hey. Do these usually have much larger pipes than "normal"? Is there some sort of adapter I can get to reduce it down to 1.75", or just hunt for a bigger muffler?
Thanks
1983 GPz 550
1985 Honda CH150 Scooter
1995 Suzuki GS500E
1985 Honda CH150 Scooter
1995 Suzuki GS500E
Please Log in or Create an account to join the conversation.
- jms3257
-
- Offline
- User
-

Registered
- Posts: 37
- Thanks: 1
Re: Header coating and clamp-on muffler advice
25 Oct 2011 15:45
I think you can still buy the mufflers from Kerker
Jim Smith
Jim Smith
1980 KZ1000 LTD
Been away from riding for way too long, enjoying the journey back.
Been away from riding for way too long, enjoying the journey back.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
