spark plug
- locolobo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 44
- Thanks: 0
spark plug
24 Oct 2011 23:14
what is the correct gap for the b6es plugs? 83 kz750 k1....ive been told 28 to 38...ive tried 30..but still get a little backfire at 50mph and off and on intermittingly...no big deal but i knw its there i can feel it....carbs are cleaned....pods cleaned...etc...thanx
locolobo
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: spark plug
25 Oct 2011 00:14
0.7 - 0.8 mm (0.028 - 0.031 in)
If its popping, then I would first check the valve clearance. then sounds like you have pod air filters. You are more than likely lean on your jetting. Have you increased any of the jet sizes to adjust for Pod's?
If its popping, then I would first check the valve clearance. then sounds like you have pod air filters. You are more than likely lean on your jetting. Have you increased any of the jet sizes to adjust for Pod's?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- locolobo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 44
- Thanks: 0
Re: spark plug
26 Oct 2011 18:52
yes have proper jets....will be cleaning filters this wkend,will there be any difference on the plugs if i go low or high...better in between....im not much of a mechanic i play music and ride....lol
locolobo
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: spark plug
26 Oct 2011 21:57
Check the sparkplug caps, they unscrew from the sparkplug wires. Get a multimeter, and set it for ohms(looks like the letter Omega, or an upside down horseshoe). Set the meter for 20K(20,000) as the caps if good will test to 5000 ohms. Put one probe(Red or Black) on the inside of the cap that went on the sparkplug, and the other probe where the cap screwed into the sparkplug wires.
Stll got the stock or as supplied ignition coil? It and the sparkplug wires probably need replacing. www.z1enterprises.com sells quality replacement parts for these old bikes.
Stll got the stock or as supplied ignition coil? It and the sparkplug wires probably need replacing. www.z1enterprises.com sells quality replacement parts for these old bikes.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
The following user(s) said Thank You: locolobo
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
