Ignition timing
- Kelso
-
Topic Author
- Offline
- User
-

Registered
- Posts: 17
- Thanks: 0
Ignition timing
26 Oct 2011 16:53
A Daft question for a KZ 1000 ltd B3.
Re checking the ignition timing with a strobe light.
On cyl 1+4and 2+3 should the "F" mark for both be steady on the mark when the cyl fire on tickover at 1000rpm
Or does it normaly flicker.
First time I have used one.
Richard.
Re checking the ignition timing with a strobe light.
On cyl 1+4and 2+3 should the "F" mark for both be steady on the mark when the cyl fire on tickover at 1000rpm
Or does it normaly flicker.
First time I have used one.
Richard.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Ignition timing
26 Oct 2011 19:39
The timing light will flash each time the spark occurs, so that is one flicker. But are you saying the timing mark its self is not steady against the case mark? Like is it moving around several degrees?
A slight variance can be expected with the old springs on your advancer. You may want to disassemble and clean the advancer. If you rev the motor to around 4K RPM, then the 2 far marks should be lining up, just which one, as there is two. Usually the first, closest to the left will line up.
A slight variance can be expected with the old springs on your advancer. You may want to disassemble and clean the advancer. If you rev the motor to around 4K RPM, then the 2 far marks should be lining up, just which one, as there is two. Usually the first, closest to the left will line up.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Kelso
-
Topic Author
- Offline
- User
-

Registered
- Posts: 17
- Thanks: 0
Re: Ignition timing
27 Oct 2011 05:15
Thanks for your reply,
Correct the timing mark is not steady against the case mark.
At tick over (1000rpm) the "F" mark just varies a fraction either side of the case mark.
At rev. up it does advance to the 2 marks.
Sometimes it is steady then flickers.
As I said 1st time using a stobe.
I am waiting on a hand held Tacho, to try and do final adjustment to cabs.
Do you think it could be the cabs on the pilot screw adjustment.
Correct the timing mark is not steady against the case mark.
At tick over (1000rpm) the "F" mark just varies a fraction either side of the case mark.
At rev. up it does advance to the 2 marks.
Sometimes it is steady then flickers.
As I said 1st time using a stobe.
I am waiting on a hand held Tacho, to try and do final adjustment to cabs.
Do you think it could be the cabs on the pilot screw adjustment.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Ignition timing
27 Oct 2011 10:35
Carb Sync/ Balance could make the timing move, as is directly on RPM.
Have a look at this, easy to make and will get you Syncing in no time.
www.kzrider.com/filebase/doc_download/18...fferential-manometer
Have a look at this, easy to make and will get you Syncing in no time.
www.kzrider.com/filebase/doc_download/18...fferential-manometer
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Please Log in or Create an account to join the conversation.
- Kelso
-
Topic Author
- Offline
- User
-

Registered
- Posts: 17
- Thanks: 0
Re: Ignition timing
27 Oct 2011 16:26
Thanks Patton,
Good of you to post photos.
Waiting on my Tacho (Electronic hand held) its in the post.
The bike tacho is cable driven.(Anologe)
Its not accurate.
All the replies are given me a better picture of whats what!
Ta!!
Good of you to post photos.
Waiting on my Tacho (Electronic hand held) its in the post.
The bike tacho is cable driven.(Anologe)
Its not accurate.
All the replies are given me a better picture of whats what!
Ta!!
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
