engine noise
- nads.com
-
Topic Author
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
engine noise
27 Oct 2011 17:01 - 27 Oct 2011 17:03
Been hearing this rattle and tightened the timning chain.
Didn't help. Week later (two days ago) I was out riding and
started hearing a CRACK CRACK when I revved or slowed.
Didn't know of any crack dealers.
But I knew something was going to break.
And didn't really care :woohoo:
Curious though I made it home in slow mode :dry:
Took off the valve cover and top roller, ahah!
It wasn't the problem. So I took out the cams.
OH oh! front chain roller was wasted.
What a piece of crap. Had a mere 25,000 miles on it
when I put it in and it just fell apart.
And the bike was SCREAMIN! just before that.
Then I messed with the carbs and lost it all.
Don't know if the timing was effected or if it was that
i didn't cut off my fingers after it was super tuned.
While tuning the mix screws it seeems each screw reacts to
the most minute amount of turn. The idle would stay even
for a time then all at once it would dive low.
Maybe that was the wasted gear. But folks I had the engine
smokin. And now I can't wait to fix it and go nuts some more.
Winter is on the way but I can't tell :woohoo:
I'm just not done raising hell!
There is nothing like the thrill of nearing 7grand
and twisting the throttle open and unleasing the fury of pure
power building to infinity and beyond. If I can't get that power
again I'm going for keihin 33's. But have no worries.
So.. it's get the tools out of the pawn shop and WRENCH
WRENCH WRENCH! :evil: :evil: :evil:
HEE HEE RRRRRRRRRRRRRRAAAAAAAAAAAAAAAAAAAHHHHHHHHHH!!!!
And I'll say it again, 600? PSAW!
Didn't help. Week later (two days ago) I was out riding and
started hearing a CRACK CRACK when I revved or slowed.
Didn't know of any crack dealers.
But I knew something was going to break.
And didn't really care :woohoo:
Curious though I made it home in slow mode :dry:
Took off the valve cover and top roller, ahah!
It wasn't the problem. So I took out the cams.
OH oh! front chain roller was wasted.
What a piece of crap. Had a mere 25,000 miles on it
when I put it in and it just fell apart.
And the bike was SCREAMIN! just before that.
Then I messed with the carbs and lost it all.
Don't know if the timing was effected or if it was that
i didn't cut off my fingers after it was super tuned.
While tuning the mix screws it seeems each screw reacts to
the most minute amount of turn. The idle would stay even
for a time then all at once it would dive low.
Maybe that was the wasted gear. But folks I had the engine
smokin. And now I can't wait to fix it and go nuts some more.
Winter is on the way but I can't tell :woohoo:
I'm just not done raising hell!
There is nothing like the thrill of nearing 7grand
and twisting the throttle open and unleasing the fury of pure
power building to infinity and beyond. If I can't get that power
again I'm going for keihin 33's. But have no worries.
So.. it's get the tools out of the pawn shop and WRENCH
WRENCH WRENCH! :evil: :evil: :evil:
HEE HEE RRRRRRRRRRRRRRAAAAAAAAAAAAAAAAAAAHHHHHHHHHH!!!!
And I'll say it again, 600? PSAW!
Last edit: 27 Oct 2011 17:03 by nads.com.
Please Log in or Create an account to join the conversation.
- stonemaster
-
- Offline
- User
-

Registered
- Sorry I wasnt paying attention
- Posts: 24
- Thanks: 0
Please Log in or Create an account to join the conversation.
- hoghaterkaw
-
- Offline
- User
-

Registered
- Posts: 152
- Thanks: 1
Re: engine noise
27 Oct 2011 19:06
Not sure what Nads is on these days but he would better off doing basket weaving or something else less stressful. Clearly motor work is not his long suit.
Please Log in or Create an account to join the conversation.
- nads.com
-
Topic Author
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
Re: engine noise
28 Oct 2011 01:20
RHAAAAAAAAAAAAAAAAAAAH!
I'll race anyone with a 1015cc or 1075cc with
the same compression and carbs.
NUFF SAID
wouldn't stand a chance
I'll race anyone with a 1015cc or 1075cc with
the same compression and carbs.
NUFF SAID
wouldn't stand a chance
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: engine noise
29 Oct 2011 11:39nads.com wrote: RHAAAAAAAAAAAAAAAAAAAH!
I'll race anyone with a 1015cc or 1075cc with
the same compression and carbs.
NUFF SAID
wouldn't stand a chance
:laugh: :woohoo: :woohoo: :woohoo: :silly: :pinch: :side: :S
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
