Centrifugal intermittent miss

  • cplescia
  • cplescia's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 9
  • Thanks: 0

Centrifugal intermittent miss

29 Oct 2011 12:20
#485897
I have a 78 KZ1000 in my race car (SCCA Vintage road racing). I have had a problem throughout the year where the engine develops a miss while cornering to the left (and goes away while cornering to the right). I have timed it correctly (DYNA-S) and am using Keihin CR35's.

I have checked all my wiring for an exposed wire that may be grounding but have not found anything.

Any ideas why this is happening and where to look?

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Centrifugal intermittent miss

29 Oct 2011 12:55
#485901
You should post up some pictures for everyone to see the Car and the Install, KZ porn!
Does your Tach take a dive when this happens, like an electrical Ignition issue?
You could rig a light to be illuminated when the coils have power, then slide it out left and see if it looks to loose power then. It could also be a fuel issue, I don't know which side of the float bowl the vent and over flows are on. But possibly to high a fuel level, and when ripping left it floods? Just a guess. Hows your fuel system feed, gravity or pump? If pump, do you have a Adjustable low pressure reg in line?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • cplescia
  • cplescia's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 9
  • Thanks: 0

Re: Centrifugal intermittent miss

29 Oct 2011 14:55 - 29 Oct 2011 17:44
#485919
I tried to post some picture the first time but it bombed out. Will attempt again.

The Tach stays steady. We tried disconnecting during a test day but no change.

I'm not sure I follow your test light procedure. Where would I attach a light? To each spark plus wire? The Ignition wire?

Not sure about the vent and overflow and float level. I have used CR35's in the past when I had a Z1 in the car and it was never an issue.

I have a pump running to a regulator (set and the recommended pressure). I did move it from the original position (didn't have a problem before) to further from the header since they are heat sensitive.
[attachment:1]Legrand 2011.7.23 001.JPG[/attachment]

[attachment:2]Legrand 2011.7.23 005.JPG[/attachment]
Last edit: 29 Oct 2011 17:44 by cplescia. Reason: Picture Attachment

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Centrifugal intermittent miss

29 Oct 2011 15:09
#485922
Since carburetors rely on gravity for the level of fuel in the float bowl, strong G forces can cause problems. Had the same problems with aircraft. In WW2, the British airplanes used carbs and the Germans had FI. The germans could get away by going into a dive because the carb engines would lose power.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Centrifugal intermittent miss

30 Oct 2011 00:36
#486000
cplescia wrote: I tried to post some picture the first time but it bombed out. Will attempt again.

The Tach stays steady. We tried disconnecting during a test day but no change.

I'm not sure I follow your test light procedure. Where would I attach a light? To each spark plus wire? The Ignition wire?

Not sure about the vent and overflow and float level. I have used CR35's in the past when I had a Z1 in the car and it was never an issue.

I have a pump running to a regulator (set and the recommended pressure). I did move it from the original position (didn't have a problem before) to further from the header since they are heat sensitive.
[attachment:1]Legrand 2011.7.23 001.JPG[/attachment]

[attachment:2]Legrand 2011.7.23 005.JPG[/attachment]

What I meant for a test light, you can have a light mounted temporarily to your dash and wired to the + terminal of each coil. If dropping power to them the light would go out or oscillate. Since it only happens when going left, it sounds like either a wire is broken, then when loaded it looses contact. Or the fuel problems i mentioned before. Have you checked your fuel levels? Use a piece of clear tubing hooked to the drain, or jet access plug on the bottom of the bowls. Hold the tube up along the side of the carb, and see where the liquid fuel level is at, with pump on. It should be within something like 3mm of the mating gasket surface, just below is good, not above.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum