What changed?
- ElSombreroNegro
-
Topic Author
- Offline
- User
-

Registered
- Half the wheels, Twice the pleasure..
- Posts: 63
- Thanks: 0
What changed?
01 Nov 2011 11:40
My 750 twin had a starter problem (one of the three allen bolts backed out of the hub and got in a bind) and seized up. I did not know at first what caused it, so I took of the cover, then the cams to inspect them for problems. I put them back on exactly as I found them and retightened the cam chain. I did not check lash, in hindsight I think I should have. I have been having a slight hesitation at 3/4 throttle and up.
I found the starter problem and fixed it, and put the bike back together, but now I am having more trouble than I think I should.
It idles just fine but liked it when i brought in the idle screws nearly all the way.
At any more than 3500 rpm it stutters and if I try to throttle past that it pops, backfires and sometimes spits through the carbs. I played with timing to no avail, made it worse.
Gas supply is good, and the carbs are clean. Ran fine til i took the cams loose...
Maybe I am answering my own question in this rambling post, but if so I just dont see it.
Suggestions?
I found the starter problem and fixed it, and put the bike back together, but now I am having more trouble than I think I should.
It idles just fine but liked it when i brought in the idle screws nearly all the way.
At any more than 3500 rpm it stutters and if I try to throttle past that it pops, backfires and sometimes spits through the carbs. I played with timing to no avail, made it worse.
Gas supply is good, and the carbs are clean. Ran fine til i took the cams loose...
Maybe I am answering my own question in this rambling post, but if so I just dont see it.
Suggestions?
Attachment 2011-10-31_16-39-06_559.jpg not found
(Mostly) 1976 KZ750 Twin in a (Mostly) 1978 KZ200 frame (dont ask me what I was thinking)
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: What changed?
01 Nov 2011 15:07 - 01 Nov 2011 15:12
I would check the cam timing to make sure it didn't jump a link. Sounds like carburetion problems to me more likely.
1979 KZ-750 Twin
Last edit: 01 Nov 2011 15:12 by bountyhunter.
Please Log in or Create an account to join the conversation.
- ElSombreroNegro
-
Topic Author
- Offline
- User
-

Registered
- Half the wheels, Twice the pleasure..
- Posts: 63
- Thanks: 0
Re: What changed?
01 Nov 2011 21:14bountyhunter wrote: I would check the cam timing to make sure it didn't jump a link. Sounds like carburetion problems to me more likely.
Will do. I have got to get to that place in order to check lash anyhow.
As far as the carbs go I am perplexed if it ends up being a problem with them just because it was running WAY better than this before, and all I did was take the carbs off and then back on when I reinstalled the motor. PooPoo happens though and I will check them too.
BTW, I wanted to thank all you guys who helped me out during this build last winter, I don't think I would have been able to ride this summer without y'alls help and insight. Thanks!
(Mostly) 1976 KZ750 Twin in a (Mostly) 1978 KZ200 frame (dont ask me what I was thinking)
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: What changed?
01 Nov 2011 22:49 - 01 Nov 2011 22:52If they sat for a while, that probably explains it. I'd check the tank for rust or sediment. I don't see inline fuel filters, they are a must for these bikes or junk will keep clogging the jets. make sure the timing advancer is free and working properly.ElSombreroNegro wrote:bountyhunter wrote: I would check the cam timing to make sure it didn't jump a link. Sounds like carburetion problems to me more likely.
Will do. I have got to get to that place in order to check lash anyhow.
As far as the carbs go I am perplexed if it ends up being a problem with them just because it was running WAY better than this before, and all I did was take the carbs off and then back on when I reinstalled the motor.
1979 KZ-750 Twin
Last edit: 01 Nov 2011 22:52 by bountyhunter.
Please Log in or Create an account to join the conversation.
- ElSombreroNegro
-
Topic Author
- Offline
- User
-

Registered
- Half the wheels, Twice the pleasure..
- Posts: 63
- Thanks: 0
Re: What changed?
02 Nov 2011 00:41
I have got an inline filter directly above the bowls on each carb, but it is a good point, the sitting for awhile. They were off for about a month and may have dried deposits in them after all. I will make sure to get them cleaned out while I have the motor apart. Also I did alot of bondo and wet sanding on the tank. There is, I suppose, a chance some very fine dust may have gotten into the tank and fuel lines....
(Mostly) 1976 KZ750 Twin in a (Mostly) 1978 KZ200 frame (dont ask me what I was thinking)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
