FSM Cam Specs

  • T_Dub
  • T_Dub's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1441
  • Thanks: 26

FSM Cam Specs

02 Nov 2011 17:55
#486721
Hey all, currently doing my cams on the 810, and I have a question. I'm only coming up with 234 degrees of duration on my GPz750 cams, and I find this odd. They're supposed to have 286. Does the FSM list the actual duration and not just the duration at .050"? For now I'm just gonna install them at 105 lobe centers, and hopefully someone can shed light on this before first fire up next week.

Thanks in advance.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler

Please Log in or Create an account to join the conversation.

  • mtkawboy
  • mtkawboy's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 822
  • Thanks: 16

Re: FSM Cam Specs

03 Nov 2011 19:25
#486880
Kawasaki & others check their cams at 0 lift or whatever spec they want. Your .050 method is the industry standard and the duration you get is most likely correct. Cam companies use various methods to keep their cams from being copied , compared or just to sound more impressive.
78-KZ1000/1105, 80 KZ1000, 82 Kawasaki GPZ750, 95 Harley Fatboy, 80 Suzuki GS1100ET, 81 GS1100E parts bike, 83 GS1100SD Katana/1394,78 Yamaha XT500, 81 Yamaha XS650, 78 Yamaha XS650E, 48 Whizzer model J motorbike, 71 Honda CT70H, 71 Honda CT70, 81 IT 250 Yamaha,82 Honda XL100S owned

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: FSM Cam Specs

03 Nov 2011 23:07
#486917
The Japanese used .040 lift with zero lash.

Please Log in or Create an account to join the conversation.

  • T_Dub
  • T_Dub's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1441
  • Thanks: 26

Re: FSM Cam Specs

03 Nov 2011 23:09
#486918
I see. I guess I'll just set the centers the way I want and not worry about it.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: FSM Cam Specs

04 Nov 2011 14:12 - 04 Nov 2011 15:06
#486995
The KZ550 factory manual uses .012" lift for their cam specs.

It doesn't actually specify the lift used for measuring duration, but when I measured them, the value that matched the specified duration was .012" lift (with zero lash). My measurements were confirmed by Megacycle at .040" lift.

Obviously the 550 was designed much later than the 650, so maybe they changed their spec regimen for the 550's.
Last edit: 04 Nov 2011 15:06 by loudhvx.

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: FSM Cam Specs

04 Nov 2011 16:33
#487000
if u set your lobe centers at 105, check to make sure u have enough valve to valve , and valve to piston clearance.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • T_Dub
  • T_Dub's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1441
  • Thanks: 26

Re: FSM Cam Specs

04 Nov 2011 17:40
#487006
How do I check that Mark? They're set to that now, doesn't seem to be any issue. I'm going to aet to 108 for running, so I have a good bottom end.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: FSM Cam Specs

04 Nov 2011 18:14
#487011
if u have had them there before u should be fine. its just a good practice to check these things when u start changing parts.
if u put in bigger valves and add bigger cams, things can collide. :sick:
if the head is on, u would put a thin peice of solder through the spark plug hole, then turn the motor by hand. u try to put the solder between the valve and piston, or between 2 valves. the piston and valve will squeeze the solder. then u can measure the solders new thickness. i start with a thin guage solder and work my way up.
as for running 105 lobe centers, that would bring the valves closer to each other . 108 would spread them out.
if u are useing stock size valve u should be ok.

i do this at dif lc's to determin my lowest posible lc. then in the future, i can change the lc, without rechecking for clearancees.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • T_Dub
  • T_Dub's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1441
  • Thanks: 26

Re: FSM Cam Specs

04 Nov 2011 19:21
#487021
Right. I have GPz750 cams, and 750 intake valves, nothing too crazy, I think she'll probably be fine enough. I'm gonna degree in at 108 lc's can leave tehm there most likely.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum