noob

  • chancelton
  • chancelton's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 11
  • Thanks: 0

noob

07 Nov 2011 13:26
#487420
So im new to the kz stuff and have some questions about my recent purchase. it is a laydown sand drag trike with what started as a kz900 and has the 1105 big bore kit. 2 speed transmission with automatic clutch. when i first got the bike it started right up without issue and after 2 race days it will not start. when it was running it didnt sound or feel like it was getting up on the pipe anyway. just never would really run out. now it wont start. checked all the basics and has spark and fuel. im thinking it has a timing issue. i pulled the valve cover off and looked at the cams and sprockets and it looks like it is off because the paint marks that someone made are not lining up.

my questions are how do i actually check timing on this bike
also, everything i have looked at for the firing order on the bikes says 1 and 4 at the same time and 2 and 3 at the same time but with the cover off and looking at the cams they obviously are not timed with one another. with the big bore kit does it change firing order? what else does it change?

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: noob

07 Nov 2011 14:29
#487432
That's correct 1-4, are on 1 dual fire coil, and 2-3 are on the other. Big bore kit doesn't have anything to do with this.
Cam timing, if you search OMR user name, for cam timing you should fine where he has posted many times with excellent clear pictures. There is also a Cam Degreeing for Zoombies in "FileBase" under non-specific models. Filebase is at the top right corner of the KZR tool bar.
You may also find a KZ900 or early 1000 manual pdf download on site if you do a search. I only have the one for the later bikes, different Chain set up.
Don't forget to check your valve clearances while you got the cover off. Get the cams back in place, and check compression.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • chancelton
  • chancelton's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 11
  • Thanks: 0

Re: noob

07 Nov 2011 16:36
#487453
update.

cylinder #1 compression 110 psi
cylinder #2 compression 60 psi
cylinder #3 compression 110 psi
cylinder #4 compression 110 psi

how does one go about checking and adjusting the valves?

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: noob

07 Nov 2011 17:15
#487458
Get a shop manual a trying to describe the many and various steps to remove ad replace the shims can be involved.

These engines use a special hardened shim between the cams and valve follower or "Bucket". As the valve seat and valves wear, they get closer to the cams, requiring thinner and thinner shims.

To replace the shims, special tools are needed along with metric wrenches and feeler gauges to determine what thickness of shim to install.

www.z1enterprises.com/Shim-Changing-Tool...ftermarket-4498.aspx is a good after market shim tool.

Most of the owners of the older Kawasaki's buy their parts from www.z1enterprises.com
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: noob

07 Nov 2011 20:34
#487474
chancelton wrote: when it was running it didnt sound or feel like it was getting up on the pipe anyway. just never would really run out. now it wont start.

Were you using a tach?

These bikes dont really feel like thier "getting on the pipe" tilll well after red line - unfortunately. You "could" have a set of high performance valve springs in there, maybe shim under buckets... in which case 10000rpm (serious pipe action :P ) would be achievable without destroying the valvetrain.

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • chancelton
  • chancelton's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 11
  • Thanks: 0

Re: noob

08 Nov 2011 17:19
#487647
the guy i got it from says he launched at 10k rpms how high will these things spin?

Please Log in or Create an account to join the conversation.

  • chancelton
  • chancelton's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 11
  • Thanks: 0

Re: noob

08 Nov 2011 18:11
#487656
it does not have a tach, rev limiter only

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: noob

12 Nov 2011 12:36
#488173
Go with the above info. These things are not generally a quick fix.

If you bing the bike to a shop to get the work done, it will cost you more than the value of the bike in many cases they will find a bazillion things to "fix".

Good luck.

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum