CAMS

  • HOGEATER
  • HOGEATER's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Been riding 2 wheels since 1965,
  • Posts: 55
  • Thanks: 1

CAMS

08 Nov 2011 17:35 - 08 Nov 2011 17:36
#487652
What are the principals behind :dry: degreeing your cams and WHY???


HOGEATER(CHUCK)
Last edit: 08 Nov 2011 17:36 by HOGEATER.

Please Log in or Create an account to join the conversation.

  • etbike3135
  • etbike3135's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 379
  • Thanks: 50

Re: CAMS

08 Nov 2011 22:09
#487693
Mostly only performance cams are degreed. There are performance reasons and reasons of necessity for degreeing cams. If you milled a lot off the head then that will change you cam timing by a few degrees or more. On some performance engines you need to move the cams just to keep the clearance to the pistons from being too close. You can move the power band some by how you set the cams. Vtec engines give you the best of both worlds by moving the cams while the engine runs, low end grunt and high end revving. Cam timing can also be affected by stretched and worn cam chains. I have never installed a set of performance cams without degreeing them. You could never be certain the aftermarket manufacturer intended them to be used with stock cam sprockets and they will just drop in and be where you want them.
1973 Kawasaki Z1
18 years in dragbikes

Please Log in or Create an account to join the conversation.

  • 531blackbanshee
  • 531blackbanshee's Avatar
  • Offline
  • Vendor
  • Vendor
    Vendors
  • Posts: 7442
  • Thanks: 796

Re: CAMS

09 Nov 2011 12:26
#487764
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum