Rotor Puller
- jersey angler
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Rotor Puller
08 Nov 2011 21:55
Hello. I'm new to the forum but I've been looking at old threads and I love it and it is extremely helpful! I'm rebuilding a 1980 kz750e (my college bike). Specifically, I am replacing the starter motor clutch. I'm about to split the crankcase, but before I do I need to pull off the alternator rotor. I have the shop manual and the part number for the rotor puller, but I can't find one anywhere. In digging around, it looks like I need a M16x1.5 or a M18x1.5 bolt. Unfortunately, neither of these are the right size. the M18 is too big, and the M16 threads in, but seems to fit really "sloppy" (it wobbles around in the hole).
If anyone knows the size of this bolt I'd really appreciate it and I promise to try to return the favor with anything I learn from this project. I tried finding a M17.5 x 1.5, but it doesn't seem to exist.
Any help would be extremely appreciated. Thanks.
If anyone knows the size of this bolt I'd really appreciate it and I promise to try to return the favor with anything I learn from this project. I tried finding a M17.5 x 1.5, but it doesn't seem to exist.
Any help would be extremely appreciated. Thanks.
1980 kz750e project - but i LOVE it
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Rotor Puller
08 Nov 2011 22:13
www.z1enterprises.com/Flywheel-Puller-18...--Kawasaki-2163.aspx
Your rear axle will match those threads, it can be used also. Just don't bugger the threads, some use a CV Joint Ball between. Or a Washer.
Your rear axle will match those threads, it can be used also. Just don't bugger the threads, some use a CV Joint Ball between. Or a Washer.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- 750steve
-
- Offline
- User
-

Registered
- Posts: 584
- Thanks: 3
Re: Rotor Puller
08 Nov 2011 22:18
Well i used the rear axle & hit it a couple of good digs with a hammer, as Motor Head says though, make sure you screw it in tight so you dont mess up the threads.
07 ZX6R Race Bike
1977 Z750 B2 Twin
1976 Z650 B1
1977 Z750 B2 Twin
1976 Z650 B1
Please Log in or Create an account to join the conversation.
- jersey angler
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Re: Rotor Puller
08 Nov 2011 22:58
Thanks Motor Head. I already bought the one you gave me the link to ($9 shipping - ouch) and it is too big. Notice the line in the description that says "Please check size needed, the OEM switched puller size on some models part way through the production run -" I bought the 16mm (another $9 shipping- ouch) and that didn't work either - too small - sloppy fit. I can't find a 17mm anywhere on the planet.
I'll try the rear axle. That would be sweeet!
I'll try the rear axle. That would be sweeet!
1980 kz750e project - but i LOVE it
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Rotor Puller
08 Nov 2011 23:03
Well if that is to big, I doubt the Axle will work. If you try, try threading just the Nut from the axle onto the two pullers. I can't think of anything that uses a 17mm thread in any pitch. Is it possible that the thread is damaged in the Rotor?
The only other bolt that some of the guys have had success with is the Steering stem bolt, on the Triple Tree. It's smaller than the axle.
The only other bolt that some of the guys have had success with is the Steering stem bolt, on the Triple Tree. It's smaller than the axle.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- jersey angler
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Re: Rotor Puller
08 Nov 2011 23:15
awesome idea. The threads aren't damaged in the rotor. I'll pull the nut from the axle and see if it fits onto one of the pullers. It could be that the 16mm is the one and I'm just being nervous about how sloppy it fits in the threads. I don't deal with metric a lot.
1980 kz750e project - but i LOVE it
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
