one more question
- locolobo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 44
- Thanks: 0
one more question
11 Nov 2011 15:39
83 750 ltd k1 belt
how do i set the timing on this bike as i have no points>?electronic
ive been looking for a place to adjust the jets on the mikunis 38...this was supposedly all done at the factory....i cant locate or find any adjustments anywhere on these darn carbs...either that or im blind...lmao.....
they are supposedly not adjustable except by a shop...i dont buy that....
thanx
doug
how do i set the timing on this bike as i have no points>?electronic
ive been looking for a place to adjust the jets on the mikunis 38...this was supposedly all done at the factory....i cant locate or find any adjustments anywhere on these darn carbs...either that or im blind...lmao.....
they are supposedly not adjustable except by a shop...i dont buy that....
thanx
doug
locolobo
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: one more question
11 Nov 2011 16:29
If you open up a CD sized cover on the right side of the engine, you should find a set (2) of magnetic pick ups. These control the IC Igniter, an electrical device that give the ignition coils their grounds, firing the sparkplugs. Your bike may or may not have a mechanical ignition advancer that uses springs and weights to control ignition advancement or retardation.
If you have the advancer,with the engine off, give it a twist by hand, it should return to it's original position, if not, carefully remove it and lubricate it using either 3-in-one or sewing machine oil on the weight pivots, spring mounts, and the shaft the assembly moves on.
The timing marks will be on the advancer for fire(F) and top(T)
As for the carb jets, most are covered by metal caps(a factory process) so people like us won't be adjusting the jets.The caps can be removed by carefully using a small sheet metal screw to provide something to grip by screwing into the caps(do not go too far as some jets are close to the surface and can be damaged).
If you have the advancer,with the engine off, give it a twist by hand, it should return to it's original position, if not, carefully remove it and lubricate it using either 3-in-one or sewing machine oil on the weight pivots, spring mounts, and the shaft the assembly moves on.
The timing marks will be on the advancer for fire(F) and top(T)
As for the carb jets, most are covered by metal caps(a factory process) so people like us won't be adjusting the jets.The caps can be removed by carefully using a small sheet metal screw to provide something to grip by screwing into the caps(do not go too far as some jets are close to the surface and can be damaged).
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
The following user(s) said Thank You: locolobo
Please Log in or Create an account to join the conversation.
- locolobo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 44
- Thanks: 0
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: one more question
12 Nov 2011 12:20 - 12 Nov 2011 12:42
What bike do you have that has 38mm Mikunis and electronic ignition?
Edit:
I must have forgotten how to read :blush:
The timing is not adjustable, and it should never need adjusting anyway.
Did you swap the original BS34 carbs for the current BS38 carbs?
Edit:
I must have forgotten how to read :blush:
The timing is not adjustable, and it should never need adjusting anyway.
Did you swap the original BS34 carbs for the current BS38 carbs?
KD9JUR
Last edit: 12 Nov 2011 12:42 by steell.
Please Log in or Create an account to join the conversation.
- locolobo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 44
- Thanks: 0
Re: one more question
13 Nov 2011 06:15
my bad they are 34 amd its an 83 750 ltd k1 w belt...no points....honest...so to me if no points its gotta be electronic right>?i could be wrong but thats what it is....
locolobo
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: one more question
13 Nov 2011 20:47locolobo wrote: my bad they are 34 amd its an 83 750 ltd k1 w belt...no points....honest...so to me if no points its gotta be electronic right>?i could be wrong but thats what it is....
You're right, it is electronic ignition, but the bikes that came with 38mm Mikunis had points, hence my initial confusion. People with 38mm Mikunis and electronic ignition either swapped carbs or ignitions
KD9JUR
Please Log in or Create an account to join the conversation.
- locolobo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 44
- Thanks: 0
Re: one more question
28 Nov 2011 01:17
the advance seems like it barely makes contact with metal prong that looks worn down to the silicon backing...have a pic if you need it....thanks mfolks....i appreciate it....
locolobo
Please Log in or Create an account to join the conversation.
- locolobo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 44
- Thanks: 0
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: one more question
28 Nov 2011 01:23
The Pick-up coil on the plate, it has that rectangular shinny piece of metal sticking out. That is Normal. The part that rotates on the Motor, on the end of the camshaft, has another raised lobe. These are not meant to touch, when the engine rotates. There is what is called an "Air Gap". When the two are facing each other there should be a small gap, no contact between those parts. Probably .006" or so.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
The following user(s) said Thank You: locolobo
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
