WHAT CARBS. TO USE
- JEFFG1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 341
- Thanks: 16
WHAT CARBS. TO USE
17 Nov 2011 13:08
WELL I AM GOING TO GIVE YOU ALL SOMTHING TO ARGUE ABOUT ON THIS POST SO HERE WE GO . I AM BUILDING A DRAGBIKE THIS WINTER ALREADY GOT SOME GOOD INFO ON MY OTHER POST ABOUT STUFF NOW I AM DOWN TO THE LAST THING. I WILL GIVE YOU ALITTLE BACKGROUND ON THE BIKE IT IS A 1977 KZ 1000 THE MOTOR HAS (BACK CUT TRANS. - MTC LOCKUP CLUTCH - WELDED CRANK - WISCO 1230 WITH HIGH COMP. PISTONS ( NOT SURE WHAT BUT IT IS ALOT ) KZ1100 J HEAD STOCK - AIR SHIFT - AIR CLUTCH - DYNA 2 STEP - DELAY CROSSOVER - AJUSTABLE SHIFT BOX - B&G SWINGARM 7" SLICK ECT. NOW I NEED A SET OF CARBS. THOUGHT ABOUT VM33 SO WHAT YOU ALL THINK??????
1976 KZ 900 PRO STREET 1977 kz1000 dragbike project
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: WHAT CARBS. TO USE
17 Nov 2011 13:50
Stock head?
I believe I read that the stock J head flows better than the previous ones, but it sounds like that might still be your bottleneck for drag racing.
If it was ported I would think the VM33's (Used Only, I believe), CR33's (Available New) or RS34's (Available New) would be a good fit. I'm sure someone else will have more (=some) experience than I, though.
Do you have a preference for the older carbs? Round slide vs. flat side opinions?
dynoman.net/carb/keiCR.html#cr33
dynoman.net/carb/mikuniRS2.html
(The RS34's are a heck of a lot cheaper than the CR33's if you're looking at brand new carbs)
I believe I read that the stock J head flows better than the previous ones, but it sounds like that might still be your bottleneck for drag racing.
If it was ported I would think the VM33's (Used Only, I believe), CR33's (Available New) or RS34's (Available New) would be a good fit. I'm sure someone else will have more (=some) experience than I, though.
Do you have a preference for the older carbs? Round slide vs. flat side opinions?
dynoman.net/carb/keiCR.html#cr33
dynoman.net/carb/mikuniRS2.html
(The RS34's are a heck of a lot cheaper than the CR33's if you're looking at brand new carbs)
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: WHAT CARBS. TO USE
17 Nov 2011 18:30
vm33's will work fine. ive used them. i currently use rs34's on my kz1200. but since u are building a drag bike, u can go bigger. 36's easy probably 38's. and when u get the head ported 38's for sure.
if it was a street bike. 34 to 36's.
now which ones? all depends on how much u want to spend.
u may find some used lectrons or rs's over at dragbike.com, but these sizes may be small for those big boys.
before u spend money porting , consider a gpz head. it will drop your compression another 1/2 point over the j but u will get bigger valves and more potential.it will be cheaper to port the gpz since there is less metal to remove.
then when its time for new pistons u can get some made to match the head and bring the compresion back up.
check your deck hight too. aim for .040" piston the head clearance.
dont forget to save some cash for a good ignition, and coils.
if it was a street bike. 34 to 36's.
now which ones? all depends on how much u want to spend.
u may find some used lectrons or rs's over at dragbike.com, but these sizes may be small for those big boys.
before u spend money porting , consider a gpz head. it will drop your compression another 1/2 point over the j but u will get bigger valves and more potential.it will be cheaper to port the gpz since there is less metal to remove.
then when its time for new pistons u can get some made to match the head and bring the compresion back up.
check your deck hight too. aim for .040" piston the head clearance.
dont forget to save some cash for a good ignition, and coils.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: WHAT CARBS. TO USE
17 Nov 2011 19:04
36 flatslides for sure. I run an 1170 that has ran 9.3's this last years and I use 34 RFS. I did use the 36's for a while but got sick of the bog when you go on the 2 step, didnt loose anything going to 34's
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
Please Log in or Create an account to join the conversation.
- JEFFG1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 341
- Thanks: 16
Re: WHAT CARBS. TO USE
17 Nov 2011 21:38
thanks ( doubledud )for the web site on carbs. i was reading that all of the carbs require push-pull throttle i have a magura 1/4 turn pull only i dont see that the pull only would be a problem but that is why i spend alot of time on here i am no master. i also have a dyna with green coils hoping that is a good ignition? so the old 33s isnt the best way to go???
1976 KZ 900 PRO STREET 1977 kz1000 dragbike project
Please Log in or Create an account to join the conversation.
- DFIGPZ
-
- Offline
- User
-

Registered
- Posts: 615
- Thanks: 121
Re: WHAT CARBS. TO USE
18 Nov 2011 00:34
for a dragbike use a 38mm lectron hands down.
1984 750 Turbo
Please Log in or Create an account to join the conversation.
- donthekawguy
-
- Offline
- User
-

Registered
- Posts: 1911
- Thanks: 8
Re: WHAT CARBS. TO USE
18 Nov 2011 04:32
The 33's will work but you will run out of carb with a couple hundred feet left in the 1/4. 36's will be better but 38's would work the best and you can still use them when you get the head done. The green coils are fine but you would probably want to upgrade to a Dyna 2000 and you will have a rev limiter built in and be able to make ignition adjustments easier.
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
Please Log in or Create an account to join the conversation.
- JEFFG1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 341
- Thanks: 16
Re: WHAT CARBS. TO USE
18 Nov 2011 09:33 - 18 Nov 2011 09:36
i have heard that the lectrons were hard to tune and also heard you have to send them off to get worked on. i was hopeing for somthing a little user friendly
1976 KZ 900 PRO STREET 1977 kz1000 dragbike project
Last edit: 18 Nov 2011 09:36 by JEFFG1.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: WHAT CARBS. TO USE
18 Nov 2011 10:22 - 18 Nov 2011 10:24heard that the lectrons were hard to tune --- probably with reference to tuning for an acceptable full range of street performance.JEFFG1 wrote: i have heard that the lectrons were hard to tune and also heard you have to send them off to get worked on. i was hopeing for somthing a little user friendly
Am thinking lectrons are sufficiently user friendly for dedicated drag bike performance.
Could be mistaken, but believe KZr member timebomb33 has opted for lectrons on at least one of his drag bikes.
A forum search on lectrons may prove helpful and informative.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 18 Nov 2011 10:24 by Patton.
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: WHAT CARBS. TO USE
18 Nov 2011 10:25
Never liked the old round slides, seems like they have to be just perfect to work. Ran lectrons for 10 years and would never go back after using the flatslides. Basically lectrons are like running with the choke on all the time. Yes some people say they can tune them but I never could. They ran great, just dont let your motor idle too long or youll foul the plugs out. Too many people think bigger is better. You wouldnt run out of carb with 34's, I know people running them on 8.9 bikes.
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: WHAT CARBS. TO USE
18 Nov 2011 11:23
Jeff - more carbs links...
(Told you guys with experience would chime in...)
kzzone.com/carbs.html
www.schnitzracingstore.com/catalogs/cata...25919&showprevnext=1
www.schnitzracingstore.com/catalogs/cata...25567&showprevnext=1
(Told you guys with experience would chime in...)
kzzone.com/carbs.html
www.schnitzracingstore.com/catalogs/cata...25919&showprevnext=1
www.schnitzracingstore.com/catalogs/cata...25567&showprevnext=1
Please Log in or Create an account to join the conversation.
- JEFFG1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 341
- Thanks: 16
Re: WHAT CARBS. TO USE
18 Nov 2011 12:08
well i can see that the carb thing is going to cost some big bucks.the wife would shit ( if she finds out ) :ohmy: i still think i will stay away from the lectrons untill i run it this year see where the weak spot in the build . i need to find some info on porting i wish i could have someone do it but i have spent alot on this already. this whole progect started when we took our street bikes to the track over the summer what a blast but was sick to death about running the shit out of my bike :sick: so i thought i would build a bike just for that and i got alittle crazy with that.
1976 KZ 900 PRO STREET 1977 kz1000 dragbike project
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
