Seal question
- johnbgood
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 4
Seal question
17 Nov 2011 15:07
Hi
trying to get the correct seal for my 1991 KZ1000P.
Hi guys I've been trying to get the seal that goes into the sprocket cover and seals the shifter shaft.
Looking at the diagram I see part number 92049A looks like the one. When I order it, they send a seal that is way too big. I've ordered twice (now I have two wrong ones LOL).
What am I missing?
The seal was never there when I bought the bike.
any help?
Thanks
Johnbgood
trying to get the correct seal for my 1991 KZ1000P.
Hi guys I've been trying to get the seal that goes into the sprocket cover and seals the shifter shaft.
Looking at the diagram I see part number 92049A looks like the one. When I order it, they send a seal that is way too big. I've ordered twice (now I have two wrong ones LOL).
What am I missing?
The seal was never there when I bought the bike.
any help?
Thanks
Johnbgood
KZ1000P 1991
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: Seal question
17 Nov 2011 15:29
That number is the Kawasaki reference number, not the part number. I was unable to find that reference number on the 1991 P-10 microfiche.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- johnbgood
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 4
Re: Seal question
17 Nov 2011 15:41
Thanks for checking Mcdroid. Is it possible there is not suppose to be one there? Anybody know if there really is a seal in that area?
Maybe I can measure up what I need and get a seal somewhere else?
Thanks
Johnbgood
Maybe I can measure up what I need and get a seal somewhere else?
Thanks
Johnbgood
KZ1000P 1991
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: Seal question
17 Nov 2011 15:51 - 17 Nov 2011 16:03
Are you leaking oil from there? How did you get that reference number?
EDIT: Found it. When ordering, make sure you are ordering by the part number, not the reference number...92049-1003 is what you need...this is an original part number and has not been superseded.
EDIT: Found it. When ordering, make sure you are ordering by the part number, not the reference number...92049-1003 is what you need...this is an original part number and has not been superseded.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Last edit: 17 Nov 2011 16:03 by Mcdroid.
Please Log in or Create an account to join the conversation.
- johnbgood
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 4
Re: Seal question
17 Nov 2011 16:54
No oil leak. There is really nothing behind it. Just saw a place that looked like it was made to hold a seal in the cover. Thought it might affect shaft wear or something.
Thanks for the number. I'm ordering right away.
Thanks for your help and effort.
Johnbgood
Thanks for the number. I'm ordering right away.
Thanks for your help and effort.
Johnbgood
KZ1000P 1991
Please Log in or Create an account to join the conversation.
- johnbgood
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 4
Re: Seal question
21 Nov 2011 13:00
Hi Guys
order the seal but it turns out that seal is for the clutch release cup where the 3 balls reside.
Does anybody know offhand if there really is a seal in that area? Anybody have the sprocket cover off of there KZ1000 Police and can have a look?
Thanks
Johnbgood
order the seal but it turns out that seal is for the clutch release cup where the 3 balls reside.
Does anybody know offhand if there really is a seal in that area? Anybody have the sprocket cover off of there KZ1000 Police and can have a look?
Thanks
Johnbgood
KZ1000P 1991
Please Log in or Create an account to join the conversation.
- P21
-
- Offline
- User
-

Registered
- Posts: 471
- Thanks: 34
Please Log in or Create an account to join the conversation.
- johnbgood
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 4
Re: Seal question
21 Nov 2011 13:53
Hi P21
Yeh. I have 3 of those already (actually two from these guys and one from a dealer). The picture looks like it is line with the gear change shaft but is really for the area where the 3 balls are and is called a clutch release seal.
I don't see any shift shaft seal listed?
Thanks
Johnbgood
Yeh. I have 3 of those already (actually two from these guys and one from a dealer). The picture looks like it is line with the gear change shaft but is really for the area where the 3 balls are and is called a clutch release seal.
I don't see any shift shaft seal listed?
Thanks
Johnbgood
KZ1000P 1991
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
