1977/78 kz1000 piston ring specifications
- Old Man Rock
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
1977/78 kz1000 piston ring specifications
27 Nov 2011 18:43
Hey all,
Ok, need some help on the OEM (1015cc) piston ring specification/measurement/tolerance page out of an OEM manual. I have the KZ900 (903cc) but not for the 77/78 KZ1000. I have the KZ1000/1100 manual but those are for years 1981 and up (998cc)....
Similar to image below (KZ900 Ring Specs)...
Thanks in advance.
OMR
Ok, need some help on the OEM (1015cc) piston ring specification/measurement/tolerance page out of an OEM manual. I have the KZ900 (903cc) but not for the 77/78 KZ1000. I have the KZ1000/1100 manual but those are for years 1981 and up (998cc)....
Similar to image below (KZ900 Ring Specs)...
Thanks in advance.
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: 1977/78 kz1000 piston ring specifications
27 Nov 2011 19:18
i'll check for u when i get home .
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- TomW
-
- Offline
- User
-

Registered
- Keep the blue side up.
- Posts: 502
- Thanks: 52
Re: 1977/78 kz1000 piston ring specifications
27 Nov 2011 20:44
Here ya go, straight out of the FSM. Any questions?
'78 KZ1000B2 LTD stock + Vetter Fairing & luggage
'91 ZG1200B5 Voyager XII, stock
'91 ZG1200B5 Voyager XII, stock
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: 1977/78 kz1000 piston ring specifications
27 Nov 2011 21:47
Thanks guys...
FYI.... In further research at Z1 I came to realize that the KZ250 uses the same pistons.... Googled and found the OEM KZ250 manual as well....
Basically researching all my options for my repair build... Seems the KZ1000 OEM pistons are in extremely good shape (Specs)...
OMR
FYI.... In further research at Z1 I came to realize that the KZ250 uses the same pistons.... Googled and found the OEM KZ250 manual as well....
Basically researching all my options for my repair build... Seems the KZ1000 OEM pistons are in extremely good shape (Specs)...
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: 1977/78 kz1000 piston ring specifications
27 Nov 2011 21:51
i just emailed u a manual. let me know if u get it.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 1977/78 kz1000 piston ring specifications
28 Nov 2011 00:29
If needed, some copies from 1977,78,79 KZ1000.
Let us know if a better/larger pic would be more legible.
Good Fortune!
Let us know if a better/larger pic would be more legible.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 1977/78 kz1000 piston ring specifications
28 Nov 2011 00:29Attachment pis978.jpg not found
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: 1977/78 kz1000 piston ring specifications
28 Nov 2011 08:16 - 28 Nov 2011 08:28
Perfect Patton.... Thanks!
Now this is weird for the two manuals have slightly different tolerances :S but are the exact same piston/rings... :laugh: I'll go with these....
Now this is weird for the two manuals have slightly different tolerances :S but are the exact same piston/rings... :laugh: I'll go with these....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 28 Nov 2011 08:28 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: 1977/78 kz1000 piston ring specifications
28 Nov 2011 19:04
Maybe thats what happened to your last motor. 2 many manuals, toooooo many specs.
:laugh:
:laugh:
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: 1977/78 kz1000 piston ring specifications
28 Nov 2011 20:22
Damn you Marky... :laugh: :laugh: :laugh: Friggin A-hole.... :laugh: :laugh: :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
