What cams do i need?
- Kitten Tooth
-
Topic Author
- Offline
- User
-

Registered
- Posts: 743
- Thanks: 10
What cams do i need?
29 Nov 2011 14:40
Im looking in to buying some stuff for my bike for the tear down. I heard that GPZ1100 cams are the way to go if im looking for extra horses with porting and whatnot. What year do they switch over from? I looked on ebay and the only ones i found had the cam chain gears off to one side and not in the middle of the cam.
Just on what i plan on doing..
Running a Kerker 4-1 with the stock air box.
Re-jetting for the 4-1 since it runs really lean.
Keeping the stock bore.
Just having the top end machined and ported.
I just want a good daily runner that has one hell of a highway gear
and really good torque/pickup.
Just on what i plan on doing..
Running a Kerker 4-1 with the stock air box.
Re-jetting for the 4-1 since it runs really lean.
Keeping the stock bore.
Just having the top end machined and ported.
I just want a good daily runner that has one hell of a highway gear
1981 Kawasaki KZ1000-K LTD
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: What cams do i need?
29 Nov 2011 15:20
The 83/84 GPZ cams have more lift then the 81/82(.375 vs .355) They are about as hard to find now as a decent price on aftermarket cams.
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: What cams do i need?
29 Nov 2011 20:47
u are setting up week bottom end combo.
buy adding big highway gears u will loose bottom end .to make up for the power loss from the gearing, u should add bottom end torque (compression). if u add too much cam u will loose bottom end unless u add compression.
the gpz cams may be ok, but as u add duration u will get weaker in the bottom, until u increase compression.
buy adding big highway gears u will loose bottom end .to make up for the power loss from the gearing, u should add bottom end torque (compression). if u add too much cam u will loose bottom end unless u add compression.
the gpz cams may be ok, but as u add duration u will get weaker in the bottom, until u increase compression.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Ktm181
-
- Offline
- User
-

Registered
- Man made it, so Man can fix it
- Posts: 71
- Thanks: 1
Re: What cams do i need?
29 Nov 2011 23:13
I am running 1075 wiseco a LarryC ported head, 118 Webcams, CR29 keihins, makes GOOD power from 4500 to 9000, tails off a bit after 8500rpm, its a good street motor, 118 Webcams are 360 lift and not a huge amount of overlap, wiseco pistons are 10.25 to 1, good on fuel 40+mpg cruising.
cheers,
Kt
cheers,
Kt
Please Log in or Create an account to join the conversation.
- Kitten Tooth
-
Topic Author
- Offline
- User
-

Registered
- Posts: 743
- Thanks: 10
Re: What cams do i need?
30 Nov 2011 04:32mark1122 wrote: u are setting up week bottom end combo.
buy adding big highway gears u will loose bottom end .to make up for the power loss from the gearing, u should add bottom end torque (compression). if u add too much cam u will loose bottom end unless u add compression.
the gpz cams may be ok, but as u add duration u will get weaker in the bottom, until u increase compression.
Oh no when i said "one hell of a highway gear" i meant like ungodly amounts of power when you downshift and rip and the throttle.
1981 Kawasaki KZ1000-K LTD
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
Please Log in or Create an account to join the conversation.
- Kitten Tooth
-
Topic Author
- Offline
- User
-

Registered
- Posts: 743
- Thanks: 10
Re: What cams do i need?
30 Nov 2011 04:47
I dont plan on doing anything with the bottom end. My transmission in my bike is beautiful. And im sorry i should have known better
the bike we are talking about is an 81' KZ1000LTD. The reason im even tearing into the top end is because i ran a Kerker 4-1 like dumbass without re-jetting and it sounded like firecrackers going off behind me when i let off the throttle. I ran the bike like this for a whole summer basically and now im paying for it with burnt valve stem seals/guides. The bike still runs like a clock but it keeps on fowling the plugs with oil after sitting a few nights. Its got about 130PSI compression on all 4 cylinders. I planned on honing and getting new rings too while i was in there but i dont know if i have the funding for boring it out and getting a piston kit. The only reason i put the bike away was because it was getting cold out and i snapped a clutch cable on my last ride. Should i not bother camming it unless i have the money for boring it out? As far as the cylinders go i was going to take it to a local machine shop for the honing. I have a paper with all their prices and for a V8, boring it out .030 over is like 17 bucks a cylinder. thats not bad in my opinion, but aren't Wiseco piston kits like 500 bucks?
the bike we are talking about is an 81' KZ1000LTD. The reason im even tearing into the top end is because i ran a Kerker 4-1 like dumbass without re-jetting and it sounded like firecrackers going off behind me when i let off the throttle. I ran the bike like this for a whole summer basically and now im paying for it with burnt valve stem seals/guides. The bike still runs like a clock but it keeps on fowling the plugs with oil after sitting a few nights. Its got about 130PSI compression on all 4 cylinders. I planned on honing and getting new rings too while i was in there but i dont know if i have the funding for boring it out and getting a piston kit. The only reason i put the bike away was because it was getting cold out and i snapped a clutch cable on my last ride. Should i not bother camming it unless i have the money for boring it out? As far as the cylinders go i was going to take it to a local machine shop for the honing. I have a paper with all their prices and for a V8, boring it out .030 over is like 17 bucks a cylinder. thats not bad in my opinion, but aren't Wiseco piston kits like 500 bucks?
1981 Kawasaki KZ1000-K LTD
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: What cams do i need?
30 Nov 2011 15:12 - 30 Nov 2011 15:14mark1122 wrote: u are setting up week bottom end combo.
buy adding big highway gears u will loose bottom end .to make up for the power loss from the gearing, u should add bottom end torque (compression). if u add too much cam u will loose bottom end unless u add compression.
the gpz cams may be ok, but as u add duration u will get weaker in the bottom, until u increase compression.
Unless you manually adjust cam timing w/adjustable cam gears to compensate, but then why go with a high lift cam except but for racing/high rpm operation???
Torque is more fun anyways - rather than rediculous high speed i thinks.
:blink:
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Last edit: 30 Nov 2011 15:14 by TeK9iNe.
Please Log in or Create an account to join the conversation.
- Kitten Tooth
-
Topic Author
- Offline
- User
-

Registered
- Posts: 743
- Thanks: 10
Re: What cams do i need?
01 Dec 2011 00:47
I like going fast... but i like how quickly i can go fast too
i am getting my head ported. if i have a job by that time and i dont like how it runs with the cams, i can always just put my stock ones back in and wait till i got more $$$ for more options. Honestly i just want to know that i have a good motor in my bike. I do run it at higher RPM too. I almost always touch at least 8000 RPM before i shift gears. I ride it like a drag bike thats held together with duct tape
My bike is pretty ratty too. While i have the motor out ill probably get some powder coating done and repaint my tank/sheetmetal that im going to be using to make a cafe style tail end. Basically, when its all together it will just be a good looking, great running, fast bike. If i REALLY got some good money going it im gonna buy some RS flatslides for it too... I might as well be riding a crotch rocket at that point
1981 Kawasaki KZ1000-K LTD
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
Please Log in or Create an account to join the conversation.
- zukdave
-
- Offline
- User
-

Registered
- Posts: 1678
- Thanks: 227
Re: What cams do i need?
01 Dec 2011 00:59
Already over your head just buy readin this.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- Kitten Tooth
-
Topic Author
- Offline
- User
-

Registered
- Posts: 743
- Thanks: 10
Re: What cams do i need?
02 Dec 2011 09:51
Should i wait for machining to get the valve guides? and if there is no scoring on the cylinder walls should i get it honed anyways since it would be apart? i do not have it apart yet but im trying to be careful as far as saving money.
1981 Kawasaki KZ1000-K LTD
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH
DO A BARREL ROLL!!
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: What cams do i need?
02 Dec 2011 13:16Kitten Tooth wrote: I almost always touch at least 8000 RPM before i shift gears. I ride it like a drag bike thats held together with duct tapeMy bike is pretty ratty too.
OK. If this is in fact a true statement, at least half of the time - Do yourself a HUGE favor and invest in some nice high performance valve springs. It will save your head from requiring rework in short time with rpms like that. The old springs were already not that great, and the older they are the worse - huge valve float and serious valve seat smashing/power loss.
Dont buy any parts till the head is professionally inspected and parts confirmed. Lots of times the guides are perfectly fine.
Before you make the engine go fast, make your brakes go fast too. Pull, dissasemble and clean all the calipers, lines, and master cylinders. Refer to your manual. New pads, new fluid. Remember - new pads take some time to seat in. The front brake has all your stopping power. Stay straight and bring it on - you'll learn how to stop real fast.
Good luck.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: What cams do i need?
02 Dec 2011 13:19zukdave wrote: Already over your head just buy readin this.
... not very helpful.
:whistle:
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
