reinstaling cams after replaceing brokin head stud
- 771000LTD
-
Topic Author
- Offline
- User
-

Registered
- Posts: 66
- Thanks: 0
reinstaling cams after replaceing brokin head stud
04 Dec 2011 13:17
Hi, New here and need help. 79 1000 shaft. have the crank at TDC and the front cam is just where it is in OMR's pic from 7 months. But the intake, after counting 28 back links/pins and having this line up the on 28 stamped on the sprocket is way off, #4 intake cam actually pointing back at somewhere between 9&10 o'clock? suggestions:small hand gun rental!
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: reinstaling cams after replaceing brokin head stud
04 Dec 2011 13:22 - 04 Dec 2011 13:27
TDC 1-4? Then counting Links, or Pins? 2 pins per link is why. See in his Picture where the Cam lobes are pointing, as well as the notch in the end of the cam?
Post a picture?
Here is OMR's Picture;
Post a picture?
Here is OMR's Picture;
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 04 Dec 2011 13:27 by Motor Head.
The following user(s) said Thank You: 771000LTD
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: reinstaling cams after replaceing brokin head stud
04 Dec 2011 14:51 - 04 Dec 2011 14:55
double check that u have the cam chain on the crank gear properly. it can get lodged alongside the teeth and actualy turn the crank but not be correct. this can throw off the alignment at the top.
also check your manual for the pin count. if u have a mk11 motor it has a longer chain and dif sprockets. i cant recal off hand if it has the same pin count, but i think it does. i should know. i have a mk11 crank in my 76kz.but my memory is on break right now.
also check your manual for the pin count. if u have a mk11 motor it has a longer chain and dif sprockets. i cant recal off hand if it has the same pin count, but i think it does. i should know. i have a mk11 crank in my 76kz.but my memory is on break right now.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 04 Dec 2011 14:55 by mark1122.
The following user(s) said Thank You: 771000LTD
Please Log in or Create an account to join the conversation.
- 771000LTD
-
Topic Author
- Offline
- User
-

Registered
- Posts: 66
- Thanks: 0
Re: reinstaling cams after replaceing brokin head stud
04 Dec 2011 16:47
Sending pics as attachments. Hope they can be seen!
Thanks Stephen
Thanks Stephen
Please Log in or Create an account to join the conversation.
- 771000LTD
-
Topic Author
- Offline
- User
-

Registered
- Posts: 66
- Thanks: 0
Re: reinstaling cams after replaceing brokin head stud
04 Dec 2011 16:48 - 04 Dec 2011 16:51
Sending pics as attachments. Hope they can be seen!
Thanks Stephen
[attachment:1]C:\fakepath\camshaft 001.jpg[/attachment]
[attachment:2]C:\fakepath\camshaft 002.jpg[/attachment]
[attachment:3]C:\fakepath\camshaft 003.jpg[/attachment]
[attachment:4]C:\fakepath\camshaft 004.jpg[/attachment]
[attachment:5]C:\fakepath\camshaft 005.jpg[/attachment]
[attachment:6]C:\fakepath\camshaft 006.jpg[/attachment]
Thanks Stephen
[attachment:1]C:\fakepath\camshaft 001.jpg[/attachment]
[attachment:2]C:\fakepath\camshaft 002.jpg[/attachment]
[attachment:3]C:\fakepath\camshaft 003.jpg[/attachment]
[attachment:4]C:\fakepath\camshaft 004.jpg[/attachment]
[attachment:5]C:\fakepath\camshaft 005.jpg[/attachment]
[attachment:6]C:\fakepath\camshaft 006.jpg[/attachment]
Last edit: 04 Dec 2011 16:51 by 771000LTD. Reason: file did not upload
Please Log in or Create an account to join the conversation.
- 771000LTD
-
Topic Author
- Offline
- User
-

Registered
- Posts: 66
- Thanks: 0
Re: reinstaling cams after replaceing brokin head stud
04 Dec 2011 16:48
Sending pics as attachments. Hope they can be seen!
Thanks Stephen
[attachment:2]C:\fakepath\camshaft 002.jpg[/attachment]
[attachment:3]C:\fakepath\camshaft 003.jpg[/attachment]
[attachment:4]C:\fakepath\camshaft 004.jpg[/attachment]
[attachment:5]C:\fakepath\camshaft 005.jpg[/attachment]
[attachment:6]C:\fakepath\camshaft 006.jpg[/attachment]
Thanks Stephen
[attachment:2]C:\fakepath\camshaft 002.jpg[/attachment]
[attachment:3]C:\fakepath\camshaft 003.jpg[/attachment]
[attachment:4]C:\fakepath\camshaft 004.jpg[/attachment]
[attachment:5]C:\fakepath\camshaft 005.jpg[/attachment]
[attachment:6]C:\fakepath\camshaft 006.jpg[/attachment]
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: reinstaling cams after replaceing brokin head stud
04 Dec 2011 16:52 - 04 Dec 2011 16:55
Your intake cam looks about 170 degrees out. Don't bolt it down and rotate there, it might be in a spot to hit either the piston, or valve to valve. Go back and look at the picture OMR posted, you will see the EX cam And IN cam have there lobes for the #4 cylinder pointed to each other. Your IN cam is nearly pointing backwards. You may be looking at the in correct timing mark, or did you have the gears off of the camshafts themselves? Maybe the gear is on the cam wrong?
1 Picture showed up, not the others.
1 Picture showed up, not the others.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 04 Dec 2011 16:55 by Motor Head.
The following user(s) said Thank You: 771000LTD
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: reinstaling cams after replaceing brokin head stud
04 Dec 2011 16:56
are u sure u are useing the right mark on the cam sprocket?
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
The following user(s) said Thank You: 771000LTD
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: reinstaling cams after replaceing brokin head stud
04 Dec 2011 19:45 - 04 Dec 2011 19:48
www.kzrider.com/forum/8-about-the-site/4...hq-in-posted-message
When attempting to post a pic, if not already doing, could try keeping pic size within the following limits:
Width: 2400px
Height: 1200px
Size: 2048kb (2 MB)
Good Fortune!
When attempting to post a pic, if not already doing, could try keeping pic size within the following limits:
Width: 2400px
Height: 1200px
Size: 2048kb (2 MB)
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 04 Dec 2011 19:48 by Patton.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: reinstaling cams after replaceing brokin head stud
05 Dec 2011 08:05 - 05 Dec 2011 08:18
Hey guys another thought came to mind where I'm not 100% on...
1979 KZ1000 Shafty... Is this definitely a 28 tooth count or a 44 tooth count?
77, I realize your trying to get the images posted so possibly already done but a close up of the cam sprockets for us too look at would help....
Also, Stock or Performance cams with adjustable sprockets?
Example, if your sprockets look like this then this is a J series head where the tooth count would be 44 not 28 over.... Easy confirmation, remove the top idler and intake cam caps and rotate the intake cam where lobes would face each other from the right side of the bike... Tooth count?
NOTE: Don't bolt it down, just loosely lay up there to get an idea where the lobe tips would be facing each other parallel to the head decking...
Example: J head series
Z1, KZ900 & 77/78 KZ1000 Head:
1979 KZ1000 Shafty... Is this definitely a 28 tooth count or a 44 tooth count?
77, I realize your trying to get the images posted so possibly already done but a close up of the cam sprockets for us too look at would help....
Also, Stock or Performance cams with adjustable sprockets?
Example, if your sprockets look like this then this is a J series head where the tooth count would be 44 not 28 over.... Easy confirmation, remove the top idler and intake cam caps and rotate the intake cam where lobes would face each other from the right side of the bike... Tooth count?
NOTE: Don't bolt it down, just loosely lay up there to get an idea where the lobe tips would be facing each other parallel to the head decking...
Example: J head series
Z1, KZ900 & 77/78 KZ1000 Head:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 05 Dec 2011 08:18 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: reinstaling cams after replaceing brokin head stud
05 Dec 2011 09:58
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
