Carb Leak

  • dizl27
  • dizl27's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 47
  • Thanks: 0

Carb Leak

14 Dec 2011 20:04
#493166
What does it mean then the bottum little lines flow gas out. Mine seem to want to flow out gas whenever they feel like it.This is why i put the tubing like it is.
1977 650 Hardtail Bobber
1996 250 Yamaha Virago Bobber

Please Log in or Create an account to join the conversation.

  • KZJOE900
  • KZJOE900's Avatar
  • Offline
  • Administrator
  • Administrator
    Super Users
  • Posts: 1984
  • Thanks: 455

Re: Carb Leak

14 Dec 2011 20:10 - 14 Dec 2011 20:12
#493168
Those are your float bowl overflow tubes and would normally have a hose attached to each of the brass tubes and routed to down behind the engine. Sounds like maybe your float needles are not seating properly or getting stuck from time to time. Most likely due to debris from a dirty fuel tank. Or just build up of crud over time. You will need take off the float bowl and to try to clean your float needles and float seat of the offending carburetors.
It is possible that the floats themselves are out of adjustment and letting the fuel go to high in the bowl. But this is unlikely unless you have just tampered with them. Or the needles are just worn which would mean that you need to replace them along with the seats. In which case you may as well clean all the carburetors and rebuild them.
Current project 76 KZ900 (This was a Vetter model)
76 KZ900
81 XJ550H SECA (Current Project)
82 XJ550R SECA
Past:
86 FJ1200
74 Z1900
72 CB450
Last edit: 14 Dec 2011 20:12 by KZJOE900.

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Carb Leak

14 Dec 2011 20:11
#493169
A manual would be a big help.

Those are overflow. The floats are either sticking, rubbing, or the float needle is stuck open allowing the float bowls to overfill, thus the overflow.

By putting the tubing like that you are more than likely getting fuel into your engine oil as the overflow has to go somewhere and in this case it is likely going into the cylinder head. This can be a very dangerous condition as well as cause damage to your engine internals as the oil is thinned out.

Please Log in or Create an account to join the conversation.

  • dizl27
  • dizl27's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 47
  • Thanks: 0

Re: Carb Leak

14 Dec 2011 20:14
#493170
10-4 taking off right now.
1977 650 Hardtail Bobber
1996 250 Yamaha Virago Bobber

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Carb Leak

14 Dec 2011 21:48
#493185
Not trying to be an ass...hope it didn't come across wrong. :)

Please Log in or Create an account to join the conversation.

  • dizl27
  • dizl27's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 47
  • Thanks: 0

Re: Carb Leak

14 Dec 2011 22:11
#493191
nope your all good. Ill post some updated pics here in a few.
1977 650 Hardtail Bobber
1996 250 Yamaha Virago Bobber

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum