Starter Clutch Issue

  • Yorke2112
  • Yorke2112's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 1

Starter Clutch Issue

16 Dec 2011 21:39
#493423
I have a starter clutch issue with my kz650, first a little background. I bought a beat up beyond repair KZ650 to give my friend to turn into a cafe racer. We took the cylinders off of a KZ750 and had them bored and matched to a set up Wiseco 810 pistons.

I have taken the build off of his hands to finish on my own, as he became too busy to complete it. There has been an issue with the starter clutch not engaging, in other words the starter spocket spins. I pulled the starter clutch and all the parts seemed to be in order, I had a rebuild kit, so I decided to go ahead and put the parts in.

Once everything was installed, it initially seemed better with a little clattering, but not too bad. At present there is NO oil as I am waiting for the Yamabond to dry. Just turning the motor over without starter, its just about as bad as it was before. Does that starter clutch need oil in order to function, or do I have another problem with something else?

Please Log in or Create an account to join the conversation.

  • Yorke2112
  • Yorke2112's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 1

Re: Starter Clutch Issue

17 Dec 2011 11:50
#493465
Well after adding oil the problem is no better, the starter clutch rarely grabs now. I am wondering if the starter idle sprocket could be installed wrong. Anyone got an Idea? I am thinking I am going to drop the pan again and see if I can see what's happening when I hit the starter.

I also wonder if the engine being newly rebuilt with bigger pistons and higher compression, if that is too much for the one way bearing to grab. Any help would be appreciated.

Thanks

Please Log in or Create an account to join the conversation.

  • Yorke2112
  • Yorke2112's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 1

Re: Starter Clutch Issue

18 Dec 2011 00:37
#493564
Well I pulled the starter clutch assembly out and after closer inspection determined that the starter spocket hub was worn enough for the one way bearing to slip.

Ordered a new one from my local bike shop.

Please Log in or Create an account to join the conversation.

  • hugo
  • hugo's Avatar
  • Offline
  • User
  • User
    Registered
  • '92 Zephyr 750
  • Posts: 313
  • Thanks: 95

Re: Starter Clutch Issue

18 Dec 2011 11:58
#493620
Change also the rollers and springs while you are at it.
The following user(s) said Thank You: GPz550D1

Please Log in or Create an account to join the conversation.

  • Warlock666
  • Warlock666's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2
  • Thanks: 0

Re: Starter Clutch Issue

23 Feb 2012 00:33
#505818
Hey man,

I am having an issue with what i thought was my starter clutch but after pulling it out and inspecting jt the springs,caps and rollers all seem ok. When i set it back up on the shaft it does exactly what it is supposed to do. Moves forward but locks and grabs when i roll it backwards. Any idea what it could be?

Please Log in or Create an account to join the conversation.

  • The Milkman
  • The Milkman's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 794
  • Thanks: 194

Re: Starter Clutch Issue

25 Feb 2012 15:34
#506284
when I had my starter clutch out last year, I took it totally apart. The rubber blocks #7 were really hard. I couldn't find any to replace them. I think they were originally softer and gave the clutch a little bit of springiness so it could work properly. Like I said, I couldn't find any replacements so I put it back together with new springs and pins. Like you mine worked perfectly for a while. But, the bike starts easier but the starter still disengages before it starts only occasionaly. I think it is because of the hardness of the rubbers. I'm wondering if replacing them with some 5/16 or 3/8 rubber tubing, which ever one fits better, wouldn't correct it. But, that is waiting for next winter.
Les
78 650-C2, Stock engine, Jardine 4-2 Exh., 17-38 sprockets, dyna ignition and coils, coil wiring mod, carb mod.
The following user(s) said Thank You: GPz550D1

Please Log in or Create an account to join the conversation.

  • Yorke2112
  • Yorke2112's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 1

Re: Starter Clutch Issue

27 Feb 2012 00:08
#506605
Warlock666 wrote: Hey man,

I am having an issue with what i thought was my starter clutch but after pulling it out and inspecting jt the springs,caps and rollers all seem ok. When i set it back up on the shaft it does exactly what it is supposed to do. Moves forward but locks and grabs when i roll it backwards. Any idea what it could be?

The first time I attempted to repair the starter clutch, I bought the rebuild kit, and it still didn't work. That's when I realized the assembly where the rollers press was worn out. I bought the complete starter clutch assembly and the probably was solved.
The following user(s) said Thank You: GPz550D1

Please Log in or Create an account to join the conversation.

  • Warlock666
  • Warlock666's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2
  • Thanks: 0

Re: Starter Clutch Issue

04 Mar 2012 12:55
#507702
Thanks, I was debating on wether I should order the rebuild kit or just go ahead and get the whole casing. It does seem like a safer bet right now and taking the bike apart once was enough. Hopefully this will fix the starting problem. It only did it when it was cold so hopefully i'll be able to ride at night now and not worry about having to push it home.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum