Oil Pan Leak!
- dizl27
-
Topic Author
- Offline
- User
-

Registered
- Posts: 47
- Thanks: 0
Oil Pan Leak!
18 Dec 2011 18:51
Does anyone have trouble with he back end of the oil pan leaking on a K650. I put a new gasket and torqued my bolts to the required lbs. The leaked only seems to be right behind the oil filter. Any suggestions or tricks to stop the leak?
1977 650 Hardtail Bobber
1996 250 Yamaha Virago Bobber
1996 250 Yamaha Virago Bobber
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: Oil Pan Leak!
18 Dec 2011 19:16
Can you provide a photo of the leak location? Which "seam" is the leak coming from?
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: Oil Pan Leak!
18 Dec 2011 19:22
I honestly dont know 650's that well but on the 900/1000 if you have a bent oil filter bolt (the big bolt that goes through the filter) the oring will never seal. Its common if you have ever bottomed your bike out on the pan.
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
Please Log in or Create an account to join the conversation.
- dizl27
-
Topic Author
- Offline
- User
-

Registered
- Posts: 47
- Thanks: 0
Re: Oil Pan Leak!
18 Dec 2011 19:30
just in the back
1977 650 Hardtail Bobber
1996 250 Yamaha Virago Bobber
1996 250 Yamaha Virago Bobber
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Oil Pan Leak!
18 Dec 2011 22:37i believe thats why they enacted that rule about clearance under frames of bikes with sidewinder exhuasts! :laugh:etbike3135 wrote: I honestly dont know 650's that well but on the 900/1000 if you have a bent oil filter bolt (the big bolt that goes through the filter) the oring will never seal. Its common if you have ever bottomed your bike out on the pan.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Oil Pan Leak!
18 Dec 2011 22:38
its a little late now but i always copper coat both sides of my gaskets,also make sure pan is flat
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: Oil Pan Leak!
21 Dec 2011 11:43
Did you replace the 3 rubber orings between the pan and engine case? KZ650 is loaded with orings and they all harden and leak. These are no exception.
321,000 miles on KZ's that I can remember. Not going to see any more.
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- Fritula
-
- Offline
- User
-

Registered
- holly land garage
- Posts: 46
- Thanks: 0
Re: Oil Pan Leak!
22 Dec 2011 04:12Apsolutely wright.Even worse,I always clean surfaces with alcohol and get a bit of silicon sealer between fingers an pass tini coat on both sides of gasket :woohoo:wireman wrote: its a little late now but i always copper coat both sides of my gaskets,also make sure pan is flat
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
