different cams

  • nitrochristian
  • nitrochristian's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

different cams

19 Dec 2011 02:40
#493749
Ok kaw community, plz enlighten me. im putting my engine back together 1978 kz650 so i bought a gpz750 intake cam and put the 650 intake camchain sprocket on the 750 cam, should the marks on the cams be positioned the same as the stock cams when setting camchain to crank initial timing?
78 KZ650
96 Ford Bronco

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: different cams

19 Dec 2011 14:19 - 19 Dec 2011 14:24
#493791
Setting the gear on the cam initialy, best to set it close as possible to the position of the previous cam (lobe to tooth alignment).

Its all about the relationship of cam lobes to piston position/correct stroke.
To be done properly - this requires a cam degreeing kit. If its adjustable you'll be changing it anyways.
Otherwise, you just replicate the positions and link count as described in your service manual if it is a non-adjustable type.

ALWAYS turn things over very slowly with all components well lubricated. If you meet resistance of any kind - VISUALLY CONFIRM that there is clearance between all components before proceding further - look down plug holes to make sure pistons are not colliding with valves, etc.

Good luck.

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)
Last edit: 19 Dec 2011 14:24 by TeK9iNe.

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: different cams

19 Dec 2011 14:21
#493792
Otherwise, you just replicate the positions and link count as described in your service manual.

Yes, if you set the marks to match when switching the cam sprocket you can continue to use the service manuals method, if this is what you were asking.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum