rod bearing replacement
- nads.com
-
Topic Author
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
rod bearing replacement
24 Dec 2011 19:21
The crack crack sound when on deccel coming from the motor
on my bike turned out to be the no.1 rod bearing.
I want to send it in and have it fixed
Who does the cheapest work and how much does it cost?
It's a 76 crank and I'd like to use it instead of
another heavy crank I have.
Any suggestions would be awesome.
on my bike turned out to be the no.1 rod bearing.
I want to send it in and have it fixed
Who does the cheapest work and how much does it cost?
It's a 76 crank and I'd like to use it instead of
another heavy crank I have.
Any suggestions would be awesome.
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: rod bearing replacement
24 Dec 2011 19:32
You have your motor all torn down again? Didn't you just get it running blowing away sportbikes not that long ago?
Bummer.
Bummer.
Please Log in or Create an account to join the conversation.
- nads.com
-
Topic Author
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
Re: rod bearing replacement
24 Dec 2011 20:14
Yes it was together and smoking.
Doesn't surprize me it finally broke,
I got so much rididng out of it that I
still can't believe it never had any worse problem.
So I think it's cool.
And can't seeem to find any specific prices so I guess
I'll have to call some outfits.
Would it be cheaper since it's the bearing on the end?
Can't wait to see who can do this work and how close to me.
For now I'm saving all my settings and am on freeze frame.
Ionna raise some hee ell soon enough, :woohoo:
For now it's be quiet, lurk in the shadows.
Then RAGE! all summer long. :woohoo:
Doesn't surprize me it finally broke,
I got so much rididng out of it that I
still can't believe it never had any worse problem.
So I think it's cool.
And can't seeem to find any specific prices so I guess
I'll have to call some outfits.
Would it be cheaper since it's the bearing on the end?
Can't wait to see who can do this work and how close to me.
For now I'm saving all my settings and am on freeze frame.
Ionna raise some hee ell soon enough, :woohoo:
For now it's be quiet, lurk in the shadows.
Then RAGE! all summer long. :woohoo:
Please Log in or Create an account to join the conversation.
- DFIGPZ
-
- Offline
- User
-

Registered
- Posts: 615
- Thanks: 121
Re: rod bearing replacement
24 Dec 2011 21:48
What for engine is this ? I have a Falicon crank from early KZ1000 with HD 16t center pin ready to go
1984 750 Turbo
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: rod bearing replacement
24 Dec 2011 22:42 - 24 Dec 2011 22:43
Send it to me.
Completely rebuilt -new rods/bearings trued/balanced and welded. $1000
No such thing as cheap when it comes to a pressed crank my friend.
Completely rebuilt -new rods/bearings trued/balanced and welded. $1000
No such thing as cheap when it comes to a pressed crank my friend.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Last edit: 24 Dec 2011 22:43 by TeK9iNe.
Please Log in or Create an account to join the conversation.
- andy9802gt
-
- Offline
- User
-

Registered
- If it tastes that good, eat it yourself.
- Posts: 695
- Thanks: 19
Re: rod bearing replacement
24 Dec 2011 23:50
You gotta buy a rod to get the bearing nads no way around it. Plenty of places to get the crank rebuilt though, Pearson racing, Stan gardener, falicon are the top ones I can think of and I've probably listed them cheapest to most expensive. Pearson did the crank in my bike and it was a pretty piece when I got it back.
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: rod bearing replacement
25 Dec 2011 01:06
Since #1 bearing is shot are the others getting close to the end of life or was there something that killed that one particular bearing? Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- nads.com
-
Topic Author
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
Re: rod bearing replacement
25 Dec 2011 14:07
That's thing thing, I know I've ran it low on oil many times
and yeah I'd have to get a rod so maybe I could trade the crank off?
Get another crank from ebay seems to be the deal here.
Will there be much difference using the heavy crank vs the 900 ?
Cranks seem pretty cheap on ebay..... :whistle:
BOOM!
and yeah I'd have to get a rod so maybe I could trade the crank off?
Get another crank from ebay seems to be the deal here.
Will there be much difference using the heavy crank vs the 900 ?
Cranks seem pretty cheap on ebay..... :whistle:
BOOM!
Please Log in or Create an account to join the conversation.
- Kraz1
-
- Offline
- User
-

Registered
- Posts: 394
- Thanks: 30
Re: rod bearing replacement
25 Dec 2011 15:55nads.com wrote: Will there be much difference using the heavy crank vs the 900 ?
Dig it Gangster.... Lighter Crank spins quicker. There by giving YOU the Ninja Killer type "REVS" that allow your BS34's a Big Gulp of "Air/Fuel" to throw a "Smack Down" on those pesky R6's.
On the Flip Side yo..... The Heavier Crank gives YOU the "Yank the Wheel Off the Ground in 8th Gear at "A Hunnit Thirty Five" M P H...
You Hear Me Boy?
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: rod bearing replacement
25 Dec 2011 17:07
word! :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- andy9802gt
-
- Offline
- User
-

Registered
- If it tastes that good, eat it yourself.
- Posts: 695
- Thanks: 19
Re: rod bearing replacement
25 Dec 2011 17:30wireman wrote: word! :woohoo:
To ya mutha!
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- lemo32
-
- Offline
- User
-

Registered
- The Price of Cool aint cheap
- Posts: 316
- Thanks: 2
Re: rod bearing replacement
25 Dec 2011 18:23
Nads your gonna need some of that pesky Ninja Repellent while the big kaw is down, as for the r6 I dont think anything can stop that voodo! :laugh:
1979 kz 1000 06 katana 750
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
