oil cooler hook up
- kool4kawis
-
Topic Author
- Offline
- User
-

Registered
- live is just evil in the mirror
- Posts: 19
- Thanks: 0
oil cooler hook up
28 Dec 2011 20:07
can I just remove the plug in the oil pressure unit, replace it with an -AN fitting and use that to feed the oil cooler. Thanks guys.
Please Log in or Create an account to join the conversation.
- TexasKZ
-
- Offline
- Platinum Member
-

Registered
- Posts: 8420
- Thanks: 2804
Re: oil cooler hook up
28 Dec 2011 20:13
What is your plan for the return line?
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
Please Log in or Create an account to join the conversation.
- jonnybravo
-
- Offline
- Banned
-

Registered
- Posts: 518
- Thanks: 18
Re: oil cooler hook up
28 Dec 2011 20:40
no, u have to buy fittings for both feed and return
Please Log in or Create an account to join the conversation.
- kool4kawis
-
Topic Author
- Offline
- User
-

Registered
- live is just evil in the mirror
- Posts: 19
- Thanks: 0
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: oil cooler hook up
29 Dec 2011 02:16kool4kawis wrote: can I just remove the plug in the oil pressure unit, replace it with an -AN fitting and use that to feed the oil cooler. Thanks guys.
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: oil cooler hook up
29 Dec 2011 10:34 - 29 Dec 2011 10:43
Drill & Tap your Oil Pan????
These would work better for ya....
KZ-650 Oil Cooler Engine Adapters
OMR
EDIT: I've downloaded this file to the Filebase here for future references... Basically goes through the installation procedure for you KZ650 folks.
kz650-oil-cooler-adapters-installation
These would work better for ya....
KZ-650 Oil Cooler Engine Adapters
OMR
EDIT: I've downloaded this file to the Filebase here for future references... Basically goes through the installation procedure for you KZ650 folks.
kz650-oil-cooler-adapters-installation
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 29 Dec 2011 10:43 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- Kawickrice
-
- Offline
- User
-

Registered
- After Monday & Tuesday, even the calendar says WTF
- Posts: 2469
- Thanks: 20
Re: oil cooler hook up
30 Dec 2011 18:16
Does the bike run hot? You want some heat in the engine. Running it to cool will do more harm than good in my opinion. Plus on cold starts it takes awhile for the oil to get to the motor because the oil will drain to the pan when not running leaving air in the lines instead of oil. I live in Florida and run one on my Z1 but not on my GS1100 or my KZ650. In the winter I disconnect my cooler on my Z1 if I am doing ant cool weather riding. In very hot weather or a hot rod motor is where you see a benefit from a cooler.
73 Kawasaki Z1
07 HD CVO Ultra Classic
82 Suzuki GS 1100
74 Yamaha RD 350 (My two stroke toy)
77 Kawasaki KZ 650B-1 (My putt around bike)
80 Indian Moped (My American Iron)
1
Long Gone
75 Suzuki GT550
74 GT 380
79 RD 400 Daytona Special
72 Honda CL 175
74 Honda QA 50
Tampa FL
07 HD CVO Ultra Classic
82 Suzuki GS 1100
74 Yamaha RD 350 (My two stroke toy)
77 Kawasaki KZ 650B-1 (My putt around bike)
80 Indian Moped (My American Iron)
1
Long Gone
75 Suzuki GT550
74 GT 380
79 RD 400 Daytona Special
72 Honda CL 175
74 Honda QA 50
Tampa FL
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: oil cooler hook up
30 Dec 2011 21:44Yes, that's how a "parallel" cooler hooks up but you have to have a restrictor orifice at the point where the oil comes out so there is minimal pump pressure loss. Also need a thermostat in series to prevent oil flow throgh the cooler until the oil gets hot.kool4kawis wrote: can I just remove the plug in the oil pressure unit, replace it with an -AN fitting and use that to feed the oil cooler. Thanks guys.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: oil cooler hook up
30 Dec 2011 21:46That's true.Kawickrice wrote: Does the bike run hot? You want some heat in the engine. Running it too cool will do more harm than good in my opinion.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
