Flywheel magnet blew up.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Flywheel magnet blew up.
31 Dec 2011 20:05
So, my project bike I bought as a frame and engine.
Pulled the valve cover, looks perfect in there.
Pulled the stator cover.
Magnet exploded, lots of bits missing.
Anyone dealt with this before?
Im assuming Ill need to pull the pan and flush the crankcase and hope for the best, was really hoping to not have to pull the motor completely apart this time, but meh. Aarrgghh!
Pulled the valve cover, looks perfect in there.
Pulled the stator cover.
Anyone dealt with this before?
Im assuming Ill need to pull the pan and flush the crankcase and hope for the best, was really hoping to not have to pull the motor completely apart this time, but meh. Aarrgghh!
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Flywheel magnet blew up.
31 Dec 2011 20:16
Could you put your bike in the signiture part of your profile? It helps a lot.
Pull the pan and start looking for pieces. Roy
Pull the pan and start looking for pieces. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Flywheel magnet blew up.
31 Dec 2011 20:48
Oh man. Just occurred to me that all the little bits are stuck to everything steel inside the engine/trans.
Awesome.
Awesome.
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Flywheel magnet blew up.
31 Dec 2011 20:52
Looks like its time to tear this down...
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Flywheel magnet blew up.
31 Dec 2011 21:10
I wouldn't tear it down. I have had this happen to me twice and I got the pieces out and never had a problen. Just use carb cleaner to shoot into the engine so the pieces that are stuck to the alunimun will come loose.
It's no big thing. Roy
It's no big thing. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- Robwolf
-
- Offline
- User
-

Registered
- It's ugly, but it moves!
- Posts: 110
- Thanks: 2
Re: Flywheel magnet blew up.
31 Dec 2011 21:46
Same happened to my 94 vulcan. Most of the bits should be stuck inside the stator cover. Of course you should check your oil for chunks. Good luck!
'79 Kz400H1 'cafe' and '94 En500 Vulcan in swampy Florida.
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Flywheel magnet blew up.
01 Jan 2012 00:21
I think I will pull the pan and brake clean the poop out of it first.
Thanks for the encouraging words
Thanks for the encouraging words
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Flywheel magnet blew up.
01 Jan 2012 00:24Robwolf wrote: Same happened to my 94 vulcan. Most of the bits should be stuck inside the stator cover. Of course you should check your oil for chunks. Good luck!
There are no pieces in the cover. I can only imagine them attached to my crank and trans.
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Flywheel magnet blew up.
01 Jan 2012 14:35
Pulled the pan and pump, looks much better than I imagined. Going to clean it up and put it back together.
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
