Tachometer Pinion
- mwriders
-
Topic Author
- Offline
- User
-

Registered
- if I only had a brain
- Posts: 136
- Thanks: 6
Tachometer Pinion
06 Jan 2012 16:15So, OK, I have pulled the cam cover and rockers off of my KZ440 (I won't tell you why, because it's embarassing). The assembly instructions warn that the tachometer pinion must be removed before reinstalling the cover and then slid back into place with the cover on. The problem is obvious in that the tach pinion is turned by a worm arrangement on the cam and if you just force the cover on those may not line up, resulting in damage to the pinion, the cam or both.
My problem is that I cannot budge the 32 year old screw that attaches the pinion holder to the cover. The construction of the cover is such that I'm nervous about hitting the screw with an impact driver even though I do have an appropriate JLS bit for the driver.
I doubt that there's a clever fix for this, but it never hurts to ask. What do you suppose the odds are of being able to just kind of turn the pinion into allignment when the cover goes back on?
1980 Kawasaki KZ440B (brand new eBaby)
1998 Ducati 900S (gone)
1978 BMW R100S (gone, damn it)
1975 Yamaha RD350 cafe (gone)
1986 Yamaha XJ650 Seca (gone)
1981 Kawasaki KZ440LTD (gone)
1969 HD Sportster (gone
1966 Honda CB160 (gone, damn it)
1965 Suzuki 80
1998 Ducati 900S (gone)
1978 BMW R100S (gone, damn it)
1975 Yamaha RD350 cafe (gone)
1986 Yamaha XJ650 Seca (gone)
1981 Kawasaki KZ440LTD (gone)
1969 HD Sportster (gone
1966 Honda CB160 (gone, damn it)
1965 Suzuki 80
Please Log in or Create an account to join the conversation.
- dshelly
-
- Offline
- User
-

Registered
- Posts: 258
- Thanks: 5
Re: Tachometer Pinion
06 Jan 2012 16:34
Just use your impact driver as a screwdriver. You'll be amazed how much torque you can get with one of those. Otherwise just tap lightly...
Occupation:Machinist 25+ exp.
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Tachometer Pinion
06 Jan 2012 16:38
If not already done, would apply Kroil, PBBlaster, Liquid Wrench, or 50-50 acetone/ATF mix, to the screw head (keeping it wet) and allow to soak overnight or longer.
Apply heat with propane torch to the screw/cover area just before tap-tap-tap, gentle, non-aggressive twist with impact wrench. Idea being that application of heat will cause the female threads in the aluminum cover to expand more than the male threads on the steel screw, and thereby help release the grip. And the heat should also release the grip of any red loc-tite that might be on the threads.
Would heed the manual.
Good Fortune!
Apply heat with propane torch to the screw/cover area just before tap-tap-tap, gentle, non-aggressive twist with impact wrench. Idea being that application of heat will cause the female threads in the aluminum cover to expand more than the male threads on the steel screw, and thereby help release the grip. And the heat should also release the grip of any red loc-tite that might be on the threads.
Would heed the manual.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: Tachometer Pinion
06 Jan 2012 16:45
My #3 Phillips seems to grip the JIS screws pretty well. Or you can grind down a #2 Phillips tip a bit.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Tachometer Pinion
06 Jan 2012 16:50 - 06 Jan 2012 16:51
As mentioned above, soak the screw with Kroil at least overnight (2 days is better) then use a modified #3 Phillips as described in the link below. Just grind the screwdriver bit tip until it is a perfect fit. Be sure to apply lots of inward pressure as you unscrew the screw. Ed
kzrider.com/forum/2-engine/452802-loud-c...hile-cranking#452872
kzrider.com/forum/2-engine/452802-loud-c...hile-cranking#452872
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 06 Jan 2012 16:51 by 650ed.
Please Log in or Create an account to join the conversation.
- mwriders
-
Topic Author
- Offline
- User
-

Registered
- if I only had a brain
- Posts: 136
- Thanks: 6
Re: Tachometer Pinion
06 Jan 2012 19:16650ed wrote: As mentioned above, soak the screw with Kroil at least overnight (2 days is better) then use a modified #3 Phillips as described in the link below. Just grind the screwdriver bit tip until it is a perfect fit. Be sure to apply lots of inward pressure as you unscrew the screw. Ed
kzrider.com/forum/2-engine/452802-loud-c...hile-cranking#452872
Thanks. I do have the appropriate screw driver bit.
1980 Kawasaki KZ440B (brand new eBaby)
1998 Ducati 900S (gone)
1978 BMW R100S (gone, damn it)
1975 Yamaha RD350 cafe (gone)
1986 Yamaha XJ650 Seca (gone)
1981 Kawasaki KZ440LTD (gone)
1969 HD Sportster (gone
1966 Honda CB160 (gone, damn it)
1965 Suzuki 80
1998 Ducati 900S (gone)
1978 BMW R100S (gone, damn it)
1975 Yamaha RD350 cafe (gone)
1986 Yamaha XJ650 Seca (gone)
1981 Kawasaki KZ440LTD (gone)
1969 HD Sportster (gone
1966 Honda CB160 (gone, damn it)
1965 Suzuki 80
Please Log in or Create an account to join the conversation.
- loudhvx
-
- Offline
- KZr Legend
-

Registered
- Posts: 10863
- Thanks: 1622
Re: Tachometer Pinion
06 Jan 2012 22:28mwriders wrote: What do you suppose the odds are of being able to just kind of turn the pinion into allignment when the cover goes back on?
Not good. It seems like it should be easy, but it never seems to line up right. I have toyed with that in the past, and it never goes together without binding/interfereing. Now I always take out the tach drive ... don't need to be replacing cams.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Kz550 valve train warning.
Other links.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
