Replacing plugs and wires?

  • Jajao555
  • Jajao555's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 3
  • Thanks: 0

Replacing plugs and wires?

07 Jan 2012 18:12
#496935
I'm replacing my plugs and the little caps that connect to the wires are stuck in the cable and I can't get them out. What ever I'd like to replace them anyway.

I don't know what I should do though I can buy 8ft of cable and 2 90 degree elbows on Z1 for 7.19 and whatever shipping is and I have to make them.

Or I can get one of these sets of cable already made and I just have to make the side that connects to the coil. Their a bit more expensive but I'm sure their better quality connections than I could do.
www.z1enterprises.com/Dyna-Ignition-Wire...-core-black-208.aspx

What do you guys think?

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Replacing plugs and wires?

07 Jan 2012 19:07
#496941
The sparkplug caps are usually screwed into the sparkplug wires, sometimes they may have a set screw that clamps down on the wire, so look inside the cap for a screw with a slot cut into it.

They can go bad from heat and age, so replace all 4 if possible. www.z1enterprises.com sells the caps & sparkplug wires. 7mm size will be a good fit.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • ready2ryde1985
  • ready2ryde1985's Avatar
  • Offline
  • User
  • User
    Registered
  • got to love these kzs
  • Posts: 467
  • Thanks: 4

Re: Replacing plugs and wires?

07 Jan 2012 19:19
#496944
I would sugest new coils I could not believe the diffrence good spark makes.
84 kz 700 a1
82 kz550 ltd

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum