replacing head gasket...head won't budge....help?

  • thebear250x
  • thebear250x's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

replacing head gasket...head won't budge....help?

08 Jan 2012 16:47
#497090
So I am replacing the head gasket on a friends 1982 CSR 750. Only problem is, the head will not come off. I am 100% sure all the bolts are off, I have tried to loosen up the head by tapping it with a rubber mallet, getting it to budge from compression, and next is using a propane torch to heat it up and repeat what I've already tried. you guys have any other ideas?

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 16:51
#497091
Did you get the two bolts in the cam chain tunnel?

Please Log in or Create an account to join the conversation.

  • thebear250x
  • thebear250x's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 17:02
#497095
are they actually in the cam chain tunnel? or are the outside of it, kind of underneath where the carbs boots are on the outside of the head?

Please Log in or Create an account to join the conversation.

  • thebear250x
  • thebear250x's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 17:06
#497096
either way, i still don't see any bolts that i am missing.

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 17:11
#497098
Inside with the cam chain.

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 17:15
#497100

Attachment Capture_2012-01-08.PNG not found




#30 - there's one on the front and the back.

Please Log in or Create an account to join the conversation.

  • thebear250x
  • thebear250x's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 17:41
#497102
I'm pretty sure there aren't any bolts in the cam chain tunnel on this bike. its the 750csr, aka 750m-1. Its a twin and not a 4 cyl.

Please Log in or Create an account to join the conversation.

  • taildragger1197
  • taildragger1197's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 113
  • Thanks: 16

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 18:16 - 08 Jan 2012 18:17
#497108



I see 3 6X3 HEXHEAD Bolts coming up from under the head into the camchain galley?
Part # 92001
Union City, Tennessee
1979 KZ1000 LTD B3
1979 KZ1000(1260)LTD S/G Pro ET
1993 ZX11 D1 Ninja
Last edit: 08 Jan 2012 18:17 by taildragger1197.

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 18:23
#497110
Ah, sorry - CSR made me think 4 cyl since the 650's had the CSR designation.

Please Log in or Create an account to join the conversation.

  • thebear250x
  • thebear250x's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 18:27
#497112
Those 3 bolts are already removed, and it still won't budge. I am at least confused as to why this thing won't come off lol

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 19:13 - 08 Jan 2012 19:16
#497118
If not already done, could try putting some oil into the spark plug holes, replacing the plugs, and spinning over the engine.

Valves must be operational for this procedure, whereby the compression strokes will actually produce compression.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 08 Jan 2012 19:16 by Patton.

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: replacing head gasket...head won't budge....help?

08 Jan 2012 21:59
#497150
Is it stuck on the dowel pins? B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum