83 kz750 k1 engine blown

  • dblockinc
  • dblockinc's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 3
  • Thanks: 0

83 kz750 k1 engine blown

09 Jan 2012 22:16
#497310
i have a 83 kz750 twin with now a blown engine.
here's my question...
do i rebuild and bore it out to a 900, or by a used engine?
i found a used engine on ebay for 350 +125.00 to ship.
am i better off financialy just rebuilding and making it bigger and could anyone direct me to a thread where someone has already done a bore? sorry if this has already been covered im just a very frustrated noob and trying to decide quickly. please help with any info and thanks in advance.

Please Log in or Create an account to join the conversation.

  • andler2008
  • andler2008's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 71
  • Thanks: 0

Re: 83 kz750 k1 engine blown

10 Jan 2012 00:14
#497334
as it being a twin i'd almost just buy a new one. but I have a 1000 and i wouldn't be able to resist rebuilding it to a 1105 or biggger. it's really just up to you. are you mechanically inclined? if so, REBUILD IT!!! if not just buy a new one. and im sure there are plenty of threads on here on rebuilds. just do a search. something will turn up. and get a manual for your exact bike. it'll help a lot.
1980 KZ 1075
Mods? Pshh I have no idea right now

1981 Kz1000 CSR - Sold

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: 83 kz750 k1 engine blown

10 Jan 2012 00:54
#497345
dblockinc wrote: i have a 83 kz750 twin with now a blown engine.
here's my question...
do i rebuild and bore it out to a 900, or by a used engine?
i found a used engine on ebay for 350 +125.00 to ship.
am i better off financialy just rebuilding and making it bigger and could anyone direct me to a thread where someone has already done a bore? sorry if this has already been covered im just a very frustrated noob and trying to decide quickly. please help with any info and thanks in advance.

I don't think boring to 900 is an option.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: 83 kz750 k1 engine blown

10 Jan 2012 01:35
#497354
No eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configurationWhat's "blown" on it? If something blew up inside the engine there will most likely be additional damage and a replacement motor could be much cheaper than fixing/improving upon what's there.

I'm not an expert on the twins by any means, but it looks like there are .25 mm and .75 mm oversize piston kits you can get for the engine. Don't see any hop-up piston kits at Wiseco, though. Maybe someone else sells a big piston kit for it, not sure.


Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: 83 kz750 k1 engine blown

10 Jan 2012 03:08 - 10 Jan 2012 03:12
#497363
650ed wrote:
dblockinc wrote: i have a 83 kz750 twin with now a blown engine.
here's my question...
do i rebuild and bore it out to a 900, or by a used engine?
i found a used engine on ebay for 350 +125.00 to ship.
am i better off financialy just rebuilding and making it bigger and could anyone direct me to a thread where someone has already done a bore? sorry if this has already been covered im just a very frustrated noob and trying to decide quickly. please help with any info and thanks in advance.

I don't think boring to 900 is an option.


Kawasaki Twins Owners Forum


I have an 82 750 twin motor in my 79. Bought it on eBay for $30 then drove to Ohio to get it.


865cc is easy, over that gets expensive. there's a thread on the Kawasaki Twins site that covers building up to a 865 using 2 big bore kits for a Yamaha 350 big bear and new sleeves. To go over 900 requires throwing away the sleeves and boring and plating the block, then the custom pistons.

It's a 750 twin, you got to be inventive :P
KD9JUR
Last edit: 10 Jan 2012 03:12 by steell.

Please Log in or Create an account to join the conversation.

  • andler2008
  • andler2008's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 71
  • Thanks: 0

Re: 83 kz750 k1 engine blown

10 Jan 2012 17:50
#497429
oh yes i do believe it's possible to re build it. but i don't think that it's jsut going to be a kit you can buy anywhere. your going to have to find a bigger bore piston, make sure the have the same skirt length and make sure the pin is the same size for the top of the rod. it would definately take time and would be alot more expensive than just finding a good replacement. or you could just buy new rings and a gasket kit and hone out the cylinders and it should be good to go.
1980 KZ 1075
Mods? Pshh I have no idea right now

1981 Kz1000 CSR - Sold

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: 83 kz750 k1 engine blown

11 Jan 2012 01:35
#497497
Posted by martijn in the 750 engine forum (stickied btw) at the link above:
here some pics and parts for a big bore .... but be quiet and don't tell anyone...
It took me several months to find out all specs and do the math.

use the piston of a Yamaha YFM (warrior/big bear ATV) This is a single 350cc engine.
These pistons are available in standard 83mm and two oversizes of 0,50mm each.
So you can go to max 864cc Mr. Green I went for the first oversize so I can do a rebore

Pins are the same, piston is shorter and 25 grams lighter. compression height is 0,2mm lower but who bothers with more cc's and thus more compression.
WARNING. Do not use the cheaper Enumura pistons, they tend to disintegrate (explode). Buy the wiseco's.
The pockets in the piston are a bit out of center and should be reamed wider (dremel).

Sleeves have to be replaced. I ordered the sleeves of a YFM 400 warrior. This sleeve is a bit longer then the one of the 350 but still not the length of our twin.
Sleeve part number YA5231

There is no need to let them make them custom.


Bought another 82 750 twin frame and motor recently for $100, again off eBay.

By the way, the guys that have built the big bore motors say you must dual plug the head to get rid of the detonation.

KZR has kinda morphed into the KZ four site while most of the KZ twin owners are on The Kawasaki Twins Owners Forum
KD9JUR

Please Log in or Create an account to join the conversation.

  • faffi
  • faffi's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 554
  • Thanks: 36

Re: 83 kz750 k1 engine blown

11 Jan 2012 04:35
#497515
Back to the original question; you'll be financially better off buying a used engine rather than rescuing a broken one - especially if you plan to go to 865cc. You need to decided whether the extra torque that comes with building your own engine is worth the extra time and money you need to spend.
1977 KZ650B1
1980 F1 engine
B1 3-phase alternator
B1 Points ignition

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: 83 kz750 k1 engine blown

11 Jan 2012 10:29
#497530
faffi wrote: Back to the original question; you'll be financially better off buying a used engine rather than rescuing a broken one - especially if you plan to go to 865cc. You need to decided whether the extra torque that comes with building your own engine is worth the extra time and money you need to spend.

And frustration since you state your a noob. It's inevitable. We all go through it as we learn.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: 83 kz750 k1 engine blown

11 Jan 2012 10:36
#497531
Doubledub: I notice there still has been no reply to your excellent question "What's "blown" on it?" I wonder what makes him believe the engine is "blown?" Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: 83 kz750 k1 engine blown

11 Jan 2012 12:50
#497541
Must have skeered him off :unsure:
KD9JUR

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: 83 kz750 k1 engine blown

11 Jan 2012 13:55
#497546
I know I'm a scary looking mutha...but I was just trying to be helpful.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum