oil pan

  • busted knuckle
  • busted knuckle's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 28
  • Thanks: 1

oil pan

15 Jan 2012 21:20
#498216
i have all the bolts out but dont see a place to pry on my oil pan, which is stuck on my 79 kz 750.
1979 kz 750 b4

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: oil pan

15 Jan 2012 22:03
#498226
Yep, I used a pocket knife blade edge at the corner tapped in from the side.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • Garn
  • Garn's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 265
  • Thanks: 13

Re: oil pan

16 Jan 2012 00:55 - 16 Jan 2012 00:56
#498256
Ensure you have the filter cover off and re-check you have all the bolts out, then give a shape tap with a soft hammer away from the fined area. Otherwiee, the pocket-knife.
RegardZ.
1 x 73 Z1 (Jaffa), 74 Z1A, 76 Z900-A4
1 x 73 Yamaha TX500 & 98 fzx250 Zeal
Sydney Australia
Last edit: 16 Jan 2012 00:56 by Garn.

Please Log in or Create an account to join the conversation.

  • Harvey1327
  • Harvey1327's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 138
  • Thanks: 9

Re: oil pan

16 Jan 2012 02:32
#498261
Are you able to follow the join between the oil pan and the bottom casing feeling with your finger all the way. There might be a hidden screw you have miss. Using a thin blade butter knife try and slice between the 2. Don't go past half way in. I would think if there aren't any screws left in then the gasket is doing a great job.
What ever you do this is tiptoe stuff.
1 x 77 Z1000
1080,cams,ported
29 smoothbores,
Akron rims,Martin Swingarm
1 x 77 Z1000
1327 Wiseco,cams
ported,34.5 S/bores
GSXR swingarm
RF900 frontend.
1 x 2008 Nightrain
shotgun shock,corbin
seat,fat bars,some bling.
www.kzrider.com/media/kunena/attachments/8119/IMG_0461.JPG

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: oil pan

16 Jan 2012 07:30 - 16 Jan 2012 07:32
#498268
A dead-blow hammer might help toward bumping the oil pan loose.

For reference, the oil pan parts diagram at kawasaki.com shows sixteen 6x25 flanged bolts plus one 6x34 hex head bolt.



If needed, here's a link for help with navigating kawasaki.com and finding parts diagrams, part names, part numbers, models sharing same part, availability, etc.
Click > kzrider.com/index.php?option=com_kunena&...w&catid=13&id=376734

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 16 Jan 2012 07:32 by Patton.

Please Log in or Create an account to join the conversation.

  • busted knuckle
  • busted knuckle's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 28
  • Thanks: 1

Re: oil pan

20 Jan 2012 13:53
#499056
Got the oil pan off. I used a pockey knife to break the seal intially, and switched to a butter knife to run along the gasket. Thanks for drawing attention to the longer bolt patton I didn't notice that and I will be sure to make note of it when I put it back on.
1979 kz 750 b4

Please Log in or Create an account to join the conversation.

  • Garn
  • Garn's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 265
  • Thanks: 13

Re: oil pan

21 Jan 2012 01:45
#499152
Sorry, no filter housing in sump. Thanks for diag patton
RegardZ
1 x 73 Z1 (Jaffa), 74 Z1A, 76 Z900-A4
1 x 73 Yamaha TX500 & 98 fzx250 Zeal
Sydney Australia

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum