carbs

  • nitrochristian
  • nitrochristian's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

carbs

19 Jan 2012 21:12
#498967
Hey Guys I'm looking to buy a set of carbs, but dont know if I can make them work. I have a 78 KZ650, and the carbs are from a kz 1000 or z1 26mm do you guys think they can work.
78 KZ650
96 Ford Bronco

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: carbs

19 Jan 2012 21:16
#498970
Yes. The Mikuni VM22/24/26/28 will all work. The 22 and 24's came on stock 650's at one point or another, the 26 and 28's came on Z1/Kz900/Kz1000. You will likely need to play with the jetting some and will likely also need the Kz900/Kz1000 carb manifolds (boots) to mount them.

www.z1enterprises.com/Carb-Holders-with-...8mm-Rubber-3245.aspx

I believe others have said that the 26/28 manifolds don't line up quite right and that there was some work to be done to get them aligned. I'll search for it.

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: carbs

19 Jan 2012 21:18
#498971
Found it - www.kzrider.com/forum/3-carburetor/21050...take-boots-for-kz650

You'll have to "elongate" the mounting holes is all to get the bolts to line up with the threads on the head.

Please Log in or Create an account to join the conversation.

  • nitrochristian
  • nitrochristian's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

Re: carbs

19 Jan 2012 21:26
#498973
THANKS alot fellas hope i win this time
78 KZ650
96 Ford Bronco

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum