Crankcase split

  • busted knuckle
  • busted knuckle's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 28
  • Thanks: 1

Crankcase split

22 Jan 2012 01:12
#499363
do I have to have the flywheel off and the clutch housing off to split the crankcase or split it and do that later. I do not have the right flywheel puller or a socket big enough to handle the clutch plate housing. 79 kz 750.
1979 kz 750 b4

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Crankcase split

22 Jan 2012 01:31 - 22 Jan 2012 01:33
#499365
Easier to get it off now without an impact gun.
Impact gun is absolutely necessary to remove it after its out.

You need the correct tools either way...

Good luck.

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)
Last edit: 22 Jan 2012 01:33 by TeK9iNe.

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: Crankcase split

22 Jan 2012 09:28
#499372
X2
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: Crankcase split

22 Jan 2012 10:57
#499378
If the question is only to split cases....

On the KZ900/1000, to split the cases only then NO you don't have to remove the flywheel. Can't say for the KZ750 so don't mind me...

If you need to remove/disassemble the flywheel/clutch for other reasons, then it can be accomplished either way but as others stated, right tools and easier now then there's you go.
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum