Con rod, small end.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Con rod, small end.
22 Jan 2012 21:41
The small end bore on one of my con rods is slightly marred. I havent gotten to measure it yet, but should it be outside of spec, what then? New crank? :S
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Con rod, small end.
22 Jan 2012 21:54
Arrrgggh!! I dont have a snap gauge small enough to measure it at home, but Im pretty sure its smoked, well, "they" there are two, 2 and 3 or course...
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- lemo32
-
- Offline
- User
-

Registered
- The Price of Cool aint cheap
- Posts: 316
- Thanks: 2
Re: Con rod, small end.
22 Jan 2012 21:56
I have seen alot of light scoring inside, they make a small brush hone for cleaning them up, I've used crocus cloth also, if its real marred i would probably guess another crank, although i did have a machinist tell me he could make a bushing for inside but I blew it off as he didnt understand or didnt know what he was talking about.
1979 kz 1000 06 katana 750
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Con rod, small end.
23 Jan 2012 10:29
Yea, after I posted this, I thought to myself, "and what do I expect anyone to say".
You can bush them, but seems easier to get a replacement crank from a reliable source.
You can bush them, but seems easier to get a replacement crank from a reliable source.
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- LarryC
-
- Offline
- User
-

Registered
- Posts: 1241
- Thanks: 309
Re: Con rod, small end.
23 Jan 2012 10:40notaduc wrote: The small end bore on one of my con rods is slightly marred. I havent gotten to measure it yet, but should it be outside of spec, what then? New crank? :S
Call John Pearson (937) 839-9723. Fair pricing, good work. Alexandria Ohio. It's worth your time if you think you need crankshaft work or a replacement. He did 4 cranks for me last summer. Nice guy, small business...... I think you'll like John.
JMO,
Larry C
Larry C.
Please Log in or Create an account to join the conversation.
- les holt
-
- Offline
- Vendor
-

Registered
- Posts: 1633
- Thanks: 286
Re: Con rod, small end.
23 Jan 2012 16:41
X2 on John, Nice work at a very fair price and easy conversations!
Les Holt
Les Holt
www.facebook.com/PdmCustomFabrication
76 kz 900 turbo
77 LTD 1000 turbo
2 78 Z1R's
72 H2
kzrider.com/forum/13-bike-related/491552...one-followed-me-home
accelerate.presspublisher.us/issue/issue-6-2012/article/ltd
www.cycleworld.com/2013/09/04/2013-cycle...-concours-bike-show/
76 kz 900 turbo
77 LTD 1000 turbo
2 78 Z1R's
72 H2
kzrider.com/forum/13-bike-related/491552...one-followed-me-home
accelerate.presspublisher.us/issue/issue-6-2012/article/ltd
www.cycleworld.com/2013/09/04/2013-cycle...-concours-bike-show/
Please Log in or Create an account to join the conversation.
- andy9802gt
-
- Offline
- User
-

Registered
- If it tastes that good, eat it yourself.
- Posts: 695
- Thanks: 19
Re: Con rod, small end.
23 Jan 2012 17:34
x3
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Con rod, small end.
23 Jan 2012 21:51 - 23 Jan 2012 21:52
Looks like the one that is the worse of the two is a thou within service limit. Eeek.
Im getting .6703
Im getting .6703
1980 (mostly) KZ1000
Last edit: 23 Jan 2012 21:52 by notaduc.
Please Log in or Create an account to join the conversation.
- lemo32
-
- Offline
- User
-

Registered
- The Price of Cool aint cheap
- Posts: 316
- Thanks: 2
Re: Con rod, small end.
24 Jan 2012 00:45
Guess I am confused about this post? If its scored inside what good would it be for it to be within service limits, you would need to remove some surface material to allow the wrist pin a good clean surface so it would not adhere to the rod and lock up. :huh:
1979 kz 1000 06 katana 750
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Con rod, small end.
24 Jan 2012 01:13
Pictures will speak volumes. What are you using to get the measurement? Small bore gauge or snap gauges? What does it feel like with a Wrist pin in the hole, compared to the others? If questionable best to send it out for re-build as suggested.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Con rod, small end.
24 Jan 2012 01:28 - 24 Jan 2012 01:38
Snap gauge. Repeatable.
Feels a little looser than the others with a wrist pin in it as expected.
I dont expect it to clean up, just reporting back...
Feels a little looser than the others with a wrist pin in it as expected.
I dont expect it to clean up, just reporting back...
1980 (mostly) KZ1000
Last edit: 24 Jan 2012 01:38 by notaduc.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Con rod, small end.
24 Jan 2012 01:36
Sounds as though you already know the answer. Best to get it right. Its only Money, easy come easy go.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
