kz550 engine possibly seized?
- mattm9250
-
Topic Author
- Offline
- User
-

Registered
- Posts: 4
- Thanks: 0
kz550 engine possibly seized?
01 Feb 2012 18:58 - 01 Feb 2012 19:01
bike: 1980 kz550, 29,000 miles
Hello all and thank you for reading my post.
I have been working on this bike for a few months. When I first bought it the engine would turn over and with constant play of the throttle you could keep it running for about 10 seconds. Now after I've tackled it with my wrenches it doesnt run at all.
My main problem I'm having is turning the engine over with the starter. Using my multimeter I know its getting voltage, I'm using a 12V 50amp battery jump bypassing the solenoid which is shot and I have had the starter tested at a reputable electric shop. The starter wines like the load is to much.
I thought maybe the spark plugs are not firing causing to much resistance for the starter. I removed the spark plugs and unplugged the ignition coils and the starter still wont move anything, engine seized? When I turn it manually using a bolt on the crankshaft it spins fine.
Events leading up:
- adjusted valves, all 8 valves had zero clearance
*when reassembling I had the cam sprockets aligned properly but with the TF 2,3 index marker(incorrect) on the crankshaft. I manually spun the crankshaft half a turn until I saw the TF 1,4 index marker and then I believe corrected cam chain timing according to manual. I used a thin dowel in the cylinder 4 to double check piston is TDC at index
-when trying to start the bike after valve clearance starter system was working fine but engine was not turning over. After about 5 minutes of attempted starting I could hear system gradually losing power to the bearly audible wine it creates now.
Other tasks undertaken, in case you think could be related:
- cleaned and gaped contact breaker points
-rewired and replaced ignition coils, www.wgcarbs.com/index.php?option=com_con...view&id=12&Itemid=26
Thanks for reading, if you have any questions, advice, or places where you would start troubleshooting please let me know.
Cheers,
Matt
Hello all and thank you for reading my post.
I have been working on this bike for a few months. When I first bought it the engine would turn over and with constant play of the throttle you could keep it running for about 10 seconds. Now after I've tackled it with my wrenches it doesnt run at all.
My main problem I'm having is turning the engine over with the starter. Using my multimeter I know its getting voltage, I'm using a 12V 50amp battery jump bypassing the solenoid which is shot and I have had the starter tested at a reputable electric shop. The starter wines like the load is to much.
I thought maybe the spark plugs are not firing causing to much resistance for the starter. I removed the spark plugs and unplugged the ignition coils and the starter still wont move anything, engine seized? When I turn it manually using a bolt on the crankshaft it spins fine.
Events leading up:
- adjusted valves, all 8 valves had zero clearance
*when reassembling I had the cam sprockets aligned properly but with the TF 2,3 index marker(incorrect) on the crankshaft. I manually spun the crankshaft half a turn until I saw the TF 1,4 index marker and then I believe corrected cam chain timing according to manual. I used a thin dowel in the cylinder 4 to double check piston is TDC at index
-when trying to start the bike after valve clearance starter system was working fine but engine was not turning over. After about 5 minutes of attempted starting I could hear system gradually losing power to the bearly audible wine it creates now.
Other tasks undertaken, in case you think could be related:
- cleaned and gaped contact breaker points
-rewired and replaced ignition coils, www.wgcarbs.com/index.php?option=com_con...view&id=12&Itemid=26
Thanks for reading, if you have any questions, advice, or places where you would start troubleshooting please let me know.
Cheers,
Matt
Last edit: 01 Feb 2012 19:01 by mattm9250. Reason: added more detail
Please Log in or Create an account to join the conversation.
- clutch
-
- Offline
- User
-

Registered
- I wish I had a tad more patience to do it better!
- Posts: 1051
- Thanks: 13
Re: kz550 engine possibly seized?
01 Feb 2012 19:06
If you can turn the engine with a wrench, it is certainly not seized. I would check start clutch to see if that is the issue. Sounds like the starter is just spinnig and not turning the engine.
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
Please Log in or Create an account to join the conversation.
- clutch
-
- Offline
- User
-

Registered
- I wish I had a tad more patience to do it better!
- Posts: 1051
- Thanks: 13
Re: kz550 engine possibly seized?
01 Feb 2012 19:07
You could try bump starting it too if you don't have a kick starter to try,
Southern Maryland, USA
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)
Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: kz550 engine possibly seized?
01 Feb 2012 19:10
Since you can turn the engine over using the nut on the crank the engine is not siezed. Verify this is true by carefully using the dowel to see if pistons are rising and falling while turning the crank. Then I would go back and review all the changes made to ensure everything is set properly. Once I ws positive the wiring, timing, valves, etc. was perfect I would push start the bike. If it starts you need to focus on the starter problem. If it won't start you need to figure out what is still wrong. In the future I would suggest rather than making wholesale changes to a bike that runs (even if only 10 seconds at a time) you should make one change at a time and after each change test the bike to see if it's better or worse. That way you can easily correct any mistakes without wondering which change is the problem. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- mattm9250
-
Topic Author
- Offline
- User
-

Registered
- Posts: 4
- Thanks: 0
Re: kz550 engine possibly seized?
03 Feb 2012 10:36
Thanks guys, i'll probably start by investigating the starter clutch, sounds like a good place to start. Cheers, Matt
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
