Ape adjustable cam sprockets

  • Powerstroke_fan
  • Powerstroke_fan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Ape adjustable cam sprockets

02 Feb 2012 21:23
#501617
I have never installed larger cams before or degreed cams. I got a set of adj sprockets for my .418 lift cams. The center hole is not large enough to go over the lobes. Do i just grind it out just enough to get them on or what??? Thanks
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Ape adjustable cam sprockets

02 Feb 2012 21:26
#501619
Seems reasonable to me - it's not used to center the cams, I would think.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: Ape adjustable cam sprockets

02 Feb 2012 21:59
#501629
You may want to touch base with APE; I'm sure they have run into this before. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Ape adjustable cam sprockets

02 Feb 2012 22:04
#501630
ya iam not sure i think they might help keep the cams sprockets straight, but they have like a half circle out of the hole on one side i think i can just grind that out a little bit and it looks like it would go. i will find out for sure whats going on before i grind on them.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • andy9802gt
  • andy9802gt's Avatar
  • Offline
  • User
  • User
    Registered
  • If it tastes that good, eat it yourself.
  • Posts: 695
  • Thanks: 19

Re: Ape adjustable cam sprockets

02 Feb 2012 22:16
#501638
the narrow part of the "egg" shape goes over the lobes the same way so you have to turn the sprocket to each lobe
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Ape adjustable cam sprockets

02 Feb 2012 22:40
#501643
Ya thats what i figured,but the hole is to small i can get it over the first lobe by angleing it through the hole but the second wont go. You cant angle it enough to make it go.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • notaduc
  • notaduc's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

Re: Ape adjustable cam sprockets

03 Feb 2012 10:24
#501717
I would talk to APE, I feel like they wouldnt sell cam gears that need to be clearanced to install.
1980 (mostly) KZ1000

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Ape adjustable cam sprockets

03 Feb 2012 13:42
#501750
ok thanks i planned on calling them today if i get time.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Ape adjustable cam sprockets

03 Feb 2012 19:33
#501822
I didnt call APE.i just went ahead and ground the corner down just a little on the sprockets and they slid on.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: Ape adjustable cam sprockets

03 Feb 2012 20:19
#501837
just grind away


Attachment ADJUSTABLECAMSPROCKETS.jpg not found

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum