oil pressure switch
- busted knuckle
-
Topic Author
- Offline
- User
-

Registered
- Posts: 28
- Thanks: 1
oil pressure switch
03 Feb 2012 00:07
my oil pressure switch on my kz 750 is stuck on. Will using pb blaster or wd 40 or a propane torch damage the switch? how much force can i use to try and break it lose?
1979 kz 750 b4
Please Log in or Create an account to join the conversation.
- jonnybravo
-
- Offline
- Banned
-

Registered
- Posts: 518
- Thanks: 18
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: oil pressure switch
03 Feb 2012 07:29
Uhm can't say for the KZ750 series but the KZ900/1000 series the upper switch housing is plastic...
Thus, No likey heat torch.... Melt long time.... :blink:
Thus, No likey heat torch.... Melt long time.... :blink:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- Premium Member
-

Registered
- Posts: 4691
- Thanks: 576
Re: oil pressure switch
03 Feb 2012 21:36
Have you tested the switch?
Just wondering, as my 650s oil light has come on a few times, and each time it was the wire comming off the switch was grounding to the engine, thus iluminating the oil light.
A bit of electrical tape around the wire where the back edge of the points/pick up plate had worn through the wire's insulation fixed it up (turned off the oil light).
Just wondering, as my 650s oil light has come on a few times, and each time it was the wire comming off the switch was grounding to the engine, thus iluminating the oil light.
A bit of electrical tape around the wire where the back edge of the points/pick up plate had worn through the wire's insulation fixed it up (turned off the oil light).
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
