any idea how?
- Dboy78kz1000
-
Topic Author
- Offline
- User
-

Registered
- Posts: 85
- Thanks: 0
Please Log in or Create an account to join the conversation.
- nobody
-
- Offline
- User
-

Registered
- Posts: 169
- Thanks: 7
Re: any idea how?
07 Feb 2012 03:52
did you over look any bolts ? maybe hit it with plastic hammer to break seal ?
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: any idea how?
07 Feb 2012 04:14
Remove ALL the bolts and whack it with a rubber mallet on the flat spots (not angular to the fins).
If that doesnt jolt it loose, you can wedge the tip of a knife blade in there and pry gently a little, repeating the process carefully around the pan edge. Try not to gouge the gasket surface.
Good luck.
If that doesnt jolt it loose, you can wedge the tip of a knife blade in there and pry gently a little, repeating the process carefully around the pan edge. Try not to gouge the gasket surface.
Good luck.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- Dboy78kz1000
-
Topic Author
- Offline
- User
-

Registered
- Posts: 85
- Thanks: 0
Re: any idea how?
07 Feb 2012 11:42
i pulled all the bolts from oil pan. i just got a new rubber hammer my old one was no good.so ill go try the knife trick and see if that works.
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: any idea how?
07 Feb 2012 12:35Dboy78kz1000 wrote: i pulled all the bolts from oil pan. i just got a new rubber hammer my old one was no good.so ill go try the knife trick and see if that works.
The first time I pulled off an oil pan from my 1977 KZ1000A1, I also couldn't remove the pan...there are 17 bolts (I only removed 16 and was attempting to pry off the cover when I realized I missed one). If you have 17 bolts, then pry away
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- dshelly
-
- Offline
- User
-

Registered
- Posts: 258
- Thanks: 5
Re: any idea how?
07 Feb 2012 13:46Dboy78kz1000 wrote: i pulled all the bolts from oil pan. i just got a new rubber hammer my old one was no good.so ill go try the knife trick and see if that works.
Don't forget the filter cover. That hold it on too.
Occupation:Machinist 25+ exp.
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
Please Log in or Create an account to join the conversation.
- Dboy78kz1000
-
Topic Author
- Offline
- User
-

Registered
- Posts: 85
- Thanks: 0
Re: any idea how?
08 Feb 2012 03:57
ok so i got the oil pain off looks pretty good if u ask me. ill have pic up in a few.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
