torque v. stretch

  • notaduc
  • notaduc's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

Re: torque v. stretch

12 Feb 2012 22:48
#503611
Breaker19 wrote:
notaduc wrote:
Garn wrote: Here's one..... Do you put more torque on a bolt with anti-seize or moly compound on the thread and under the head of bolt/ screw surface.
RegardZ.
Ps. Agree 6mm threads don't need a torque wrench.

arp-bolts.com/pages/technical_torque_metric.shtml

No. In fact, with ARP head bolts (automotive), you use less torque, depending upon the fastener and the application. For example: My step-son's 87 Toyota Supra Turbo MKIII, when I did his motor with ARP head studs, 80 ft lbs with motor oil on the threads, and I think it was 60 with the ARP lube.

For general purpose fasteners that require a torque value, you should get a more accurate torque by using a lubrication medium on the threads. So, in essence, you'll be measuring the truer torque instead of the friction of the threads.


I figured the ARP chart showing lower torque values as more effective lube is used would be self explanatory. Guess I was wrong...
1980 (mostly) KZ1000

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: torque v. stretch

12 Feb 2012 22:59 - 12 Feb 2012 23:08
#503617
I don't know if any of you guys ever torqued a Ford Escort head down or not. If you have...nuff said... you get it ;)

Working with aluminum castings requires a feel. It's something you get over the years. Use a 1/4 drive ratchet on everything you can and at least put a dab of oil on the threads.

Do what you so choose. I rarely strip a bolt hole but I sure fix a lot of f'ked up cam tower bolts for people :lol:
Larry C.
Last edit: 12 Feb 2012 23:08 by LarryC.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: torque v. stretch

12 Feb 2012 23:26
#503624
Not trying to start WW III, but it may be worthwhile to warn newbies not to transfer torque values from one application to another. For example, the ARP link given earlier in this thread states ”Recommended torque is equal 75% of the fastener’s yield strength” then gives a table showing different torque values for a given diameter fastener depending on the tensile strength of the fastener. I suspect this is absolutely true for the application being addressed in that link, and I don’t doubt the accuracy or appropriateness of that information for an application in which both components of the fastener, i.e. the male and female threaded parts, share the same properties. So if a steel bolt of a given tensile strength is fastened into a steel nut of the same material tightening it up to 75% of the yield strength should be no problem. However, if that same bolt was threaded into a part made of a weaker material, such as an aluminum KZ1000 cylinder head, tightening the bolt to 75% of the bolt’s tensile strength might easily strip the threads out of the aluminum head. As evidence of this consider the recommendation in the ARP table for a ¼” bolt with a tensile strength of 220,000 psi. The recommended torque for that bolt, which is roughly equivalent to a 6mm bolt, is 22 N-m (Newton meters). That is equal to 194 in-lb (inch pounds). I have no doubt that the cam cap threads in a KZ cylinder head would strip out before the bolt was tightened close to 194 in-lb. The Kawasaki recommendation for those bolts is 95-113 in-lb and lots of folks on this forum don’t dare tighten those bolts up to the recommended max of 113 in-lb.
I only point this out so an inexperienced owner doesn’t think that any torque table he/she finds can be used for every application. Doing so could result in fasteners that are too tight, not tight enough, or stripped. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • faffi
  • faffi's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 554
  • Thanks: 36

Re: torque v. stretch

13 Feb 2012 09:13
#503688
Everybody that agrees with Ed also agrees with me and are hence good people :laugh: The rest are the enemy :pinch: Let the war begin :evil:

Joke aside, I tend to follow the manual when it comes to critical applications. If it says no lube, then I do not use any lube - or the other way around. There have also been many times when I know treads can be dubious, when I fear they cannot withstand the specified torque settings. Then I use feel - provided it's a non-critical fastener, of course - and perhaps a dab of Loctite. You can feel when treads are about to give or a bolt is about to snap quite often (difficult with brittle materials). Simply relying on a torque wrench will erase the feel if something is not 100% anymore.

Another thing many fail to think about is leverage. If you use a screwdriver and tighten a screw as hard as you can, then check how tight it is with a socket and a one foot long lever, it will not feel very tight anymore. So using small tools will generally reduce the risk of overtightening. However, you may not enjoy a wheel falling off your car at speed anymore than stripping the treads in you oil sump for the drain plug. In other words, using the correct torque settings make sense. Just like a good chief follow the recipee, so does the good mechanic follow the specifications - with just enough leeway to use personal skill ;)
1977 KZ650B1
1980 F1 engine
B1 3-phase alternator
B1 Points ignition

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: torque v. stretch

13 Feb 2012 09:28 - 13 Feb 2012 09:41
#503689
I don't see a war over this :)

Somewhere in between "it fell off going down the road" & " how much is a heli-coil kit" is the right amount of torque on the fasteners. We'll call that "THE ZONE" Find it. :woohoo:

Larry C.
Last edit: 13 Feb 2012 09:41 by LarryC.

Please Log in or Create an account to join the conversation.

  • jonnybravo
  • jonnybravo's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • Posts: 518
  • Thanks: 18

Re: torque v. stretch

13 Feb 2012 10:40
#503700
LarryC wrote: I don't know if any of you guys ever torqued a Ford Escort head down or not. If you have...nuff said... you get it ;)

Working with aluminum castings requires a feel. It's something you get over the years. Use a 1/4 drive ratchet on everything you can and at least put a dab of oil on the threads.

Do what you so choose. I rarely strip a bolt hole but I sure fix a lot of f'ked up cam tower bolts for people :lol:

here's a good example, I redid suspension components on my Ford Festiva this weekend, The Ford manual said 47 to 57 ft lbs on the sway bar bolt that goes through the Lower Control arm, I started torquing and could tell right away I wasnt gonna get there, with bushings on each side ??? So I squashed it down to the hole where the cotter pin goes through and said screw it, sometime it just dont work out the way the engineers tell u,

Please Log in or Create an account to join the conversation.

  • Breaker19
  • Breaker19's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 88
  • Thanks: 2

Re: torque v. stretch

13 Feb 2012 10:50 - 13 Feb 2012 10:51
#503701
LarryC wrote: Do what you so choose. I rarely strip a bolt hole but I sure fix a lot of f'ked up cam tower bolts for people :lol:

Yea, I had to do 12 out of the 16 on my 1100. Somebody used cheapo grade 5, I think, bolts, I am guessing because they lost the OE bolts when the top end was done. They were almost all stripped out. I had to "Re-Coil" (Fastenall product like a Helicoil) them. I've checked and rechecked the torques a few times since, still tight. But I do have a really faint tick-tick from the right side, tends to go away after it warms up. I probably will check it once more, may even go ahead and drill and re-coil the remaining few just in case. Oh, and I luckily had some proper bolts from a couple Yamaha bikes with Overhead Cams, so the hardware is all good again. Come to think about it, I think I probably should replace the cam bearings, I didn't plastigauge them, but bet they're maybe on the tired side from the caps being loose.
2003 Suzuki DR650 Dual-Sport
1982 KZ1100A2 - GONE! Traded-in for a '12 Concours 14
www.facebook.com/pages/Moto-Resto/169238286503527
Last edit: 13 Feb 2012 10:51 by Breaker19. Reason: Because I love to hear myself type.

Please Log in or Create an account to join the conversation.

  • faffi
  • faffi's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 554
  • Thanks: 36

Re: torque v. stretch

13 Feb 2012 19:23
#503789
Breaker, you sound like one of them people that lives by the motto; "If it ain't broken, rip it apart and find out why" :whistle:
1977 KZ650B1
1980 F1 engine
B1 3-phase alternator
B1 Points ignition

Please Log in or Create an account to join the conversation.

  • Breaker19
  • Breaker19's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 88
  • Thanks: 2

Re: torque v. stretch

13 Feb 2012 19:59
#503805
faffi wrote: Breaker, you sound like one of them people that lives by the motto; "If it ain't broken, rip it apart and find out why" :whistle:

I was, until I priced the cam "bushings" (bearings)... ouch! Think I'll leave this one alone.. lol
2003 Suzuki DR650 Dual-Sport
1982 KZ1100A2 - GONE! Traded-in for a '12 Concours 14
www.facebook.com/pages/Moto-Resto/169238286503527

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: torque v. stretch

13 Feb 2012 20:02
#503806
does anyone know how much i should torque my license plate bolts ?
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • jonnybravo
  • jonnybravo's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • Posts: 518
  • Thanks: 18

Re: torque v. stretch

13 Feb 2012 20:26
#503811
mark1122 wrote: does anyone know how much i should torque my license plate bolts ?

YES as tight as u can PLUS a quarter turn

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: torque v. stretch

13 Feb 2012 22:31
#503838
mark1122 wrote: does anyone know how much i should torque my license plate bolts ?

What's a license plate :woohoo: Do I need one?
Larry C.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum