CLANK-CLANK HELP!!!

  • dkl
  • dkl's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 16
  • Thanks: 0

CLANK-CLANK HELP!!!

13 Feb 2012 20:56
#503818
KZ750G TWIN Sometimes when I crank bike ther is a very loud clank---I can not isolate location of sound. If I push button starter a couple of times and it usually cranks fine. If bike has been running it cranks great,,,,,unless I pull choke, then it clanks every time. The bike runs great at low and high speeds....the clank is killin me. It is not the starter motor, It is not the starter clutch, It is not starter sprokets, and it is not starter chain.....It almost always make the clank sound when Choke is engaged. I am not knowledgable on engine mechanics...could spark advancer be problem....give me some ideas...sound is like metal hitting metal....toward the bottom of engine maybe on side of the kickstarter.
OLDER I GET
THE BETTER I WAS

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: CLANK-CLANK HELP!!!

13 Feb 2012 21:49
#503825
Is the noise only when trying to start it? I don't understand when it clanks.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • Kawickrice
  • Kawickrice's Avatar
  • Offline
  • User
  • User
    Registered
  • After Monday & Tuesday, even the calendar says WTF
  • Posts: 2469
  • Thanks: 20

Re: CLANK-CLANK HELP!!!

13 Feb 2012 22:55
#503849
Not sure about how the twin charging system works but my rotor on the crank loosened up and would smack the stator at certain rpm's.
It was such a horrific sound that I thought I had grenaded the motor.

Get a mechanics stethoscope to pinpoint the location of the noise and start ruling things out until you find it. Hopefully it is something simple. Good Luck
73 Kawasaki Z1
07 HD CVO Ultra Classic
82 Suzuki GS 1100
74 Yamaha RD 350 (My two stroke toy)
77 Kawasaki KZ 650B-1 (My putt around bike)
80 Indian Moped (My American Iron)
1
Long Gone
75 Suzuki GT550
74 GT 380
79 RD 400 Daytona Special
72 Honda CL 175
74 Honda QA 50
Tampa FL

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: CLANK-CLANK HELP!!!

14 Feb 2012 00:04
#503875
Is the clanking noise heard only while the engine is being spun over by the electric starter? :unsure:

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • dkl
  • dkl's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 16
  • Thanks: 0

Re: CLANK-CLANK HELP!!!

14 Feb 2012 00:12
#503880
does not make racket after it cranks,,,,only does it when I use electric start, but when it clanks I have gone to kickstarter and it is hard to kick and kicks back.......anyother time it kicks starts easy.
OLDER I GET
THE BETTER I WAS

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: CLANK-CLANK HELP!!!

14 Feb 2012 00:27 - 14 Feb 2012 19:21
#503888
dkl wrote: ...could spark advancer be problem....
Would lube the pivot points and assure that the advancer is returning to full retarded position, especially when the engine is shut off.

Am guessing that an advancer sticking in the advanced position might cause the clanking, and also cause the intermittent kick-back when using the kick-starter.

Could watch the advancer under a strobe type timing light, and hopefully see it quickly advance and retard as rpm is varied by blipping the throttle.

Might be able to apply lube to the pivots by reaching through the timing inspection window.
But if in doubt, would remove the advancer. and clean, inspect and lube it.

Advancer should NOT be rusted like this:





Pivot points would look something like these:




Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 14 Feb 2012 19:21 by Patton.

Please Log in or Create an account to join the conversation.

  • dkl
  • dkl's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 16
  • Thanks: 0

Re: CLANK-CLANK HELP!!!

14 Feb 2012 01:04
#503904
Thanks for the info...I will attack the spark advancer tomorrow, at least I have a plan now. but would the choke being engaged have any bearing on the spark advancer.
OLDER I GET
THE BETTER I WAS

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: CLANK-CLANK HELP!!!

14 Feb 2012 02:21 - 14 Feb 2012 02:23
#503914
dkl wrote: ... would the choke being engaged have any bearing on the spark advancer.
Just a guess, actually a true SWAG :lol: -- that if clanking worse on cold engine with choke ON, perhaps the enrichened mixture is allowing combustion with advancer stuck in advanced position (resulting in clanking), whereas mixture on cold engine with choke OFF might disallow combustion while the engine is spinning over and thereby produce no clanking regardless of advancer position.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 14 Feb 2012 02:23 by Patton.

Please Log in or Create an account to join the conversation.

  • dkl
  • dkl's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 16
  • Thanks: 0

Re: CLANK-CLANK HELP!!!

14 Feb 2012 18:21
#503994
I tore into spark-advancer (KZ750G twin) it was rusty and froze a little...I cleaned it up and when I began re-installing I noticed it was different from manual and parts fiche. It had no notch to line up cam. There was a small useless hole on plate so I lined up cam mark with hole---it matched perfectly. after installation I hit starter and it immediately spun off rotor bolt.....I have found correct advancer and am waiting for arrival...I hope previous owner put on wrong part and then gave up and threw bike in barn. I'll put it on and at least it will give me a starting point.
OLDER I GET
THE BETTER I WAS

Please Log in or Create an account to join the conversation.

  • dkl
  • dkl's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 16
  • Thanks: 0

Re: CLANK-CLANK HELP!!!

16 Feb 2012 18:15
#504449
I am still waiting for new advancer but I have a puzzling question..KZ750G Twin..I put old advancer back on bike and tried to do timing. when I align timing notch with mark beside F,,,,,I am not able to get points to close with mounting screws installed losely, (not enough travel on plate)..I have tried with cam mark on advancer both ways...The advancer on the bike has a stamp that says b-4....whats up with this......if I remove screws I can move plate a touch further and points close...does this mean bike was firing at wrong time and that is where my clank is coming from?????
OLDER I GET
THE BETTER I WAS

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: CLANK-CLANK HELP!!!

16 Feb 2012 23:08
#504501
Closed points should open when the F mark aligns with the case mark.

Opening of the points is the event that un-grounds the ignition coil and causes the ignition coil to fire.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • dkl
  • dkl's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 16
  • Thanks: 0

Re: CLANK-CLANK HELP!!!

17 Feb 2012 10:22
#504564
I own a hardware store for twenty years, and consider myself a semi-electrician, This knowledge does not translate into-ENGINE IQ-Common sense says when points close, circuit is complete and engine fires,,,,thank you-thank you-thank you..for the concise explanation..I'll dive back in today. (a little knowledge is a dangerous thing)
OLDER I GET
THE BETTER I WAS

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum