need help!! broke 2 bolts
- 79kz1000*
-
Topic Author
- Offline
- User
-

Registered
- Posts: 89
- Thanks: 1
need help!! broke 2 bolts
16 Feb 2012 15:23
So i was taking the motor a part an the 2 6mm bolts that are at the end of each side of the head that go into the jugs broke off an are in the jug part. they aren't sticking out to where i could heat them an take out. wanting to know if you can drill an tap them, or any advise would help. thanks guys
79 kz 1000 ltd
76 kz 900
76 kz 900
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
-

Vendors
- Posts: 7442
- Thanks: 796
Re: need help!! broke 2 bolts
16 Feb 2012 17:14
you can drill them out using progressively larger drill bits until you can see the edge of the threads,then take a pick and work out whats left.
hopefully you can save the threads.
make sure to get as centered as you can when you center punch it.
this is how i have done it in the past.
hth,
leon
hopefully you can save the threads.
make sure to get as centered as you can when you center punch it.
this is how i have done it in the past.
hth,
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- porchev914
-
- Offline
- User
-

Registered
- Whats that? Half of my swingarm is missing?!?!?
- Posts: 2708
- Thanks: 19
Re: need help!! broke 2 bolts
16 Feb 2012 17:21
You can also find a shop with an EDM machine. They can burn that bolt out like it was never there
FRANKEN Z!
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: need help!! broke 2 bolts
16 Feb 2012 23:15
Drill them with a left hand drill. Chances are pretty good when the drill starts biting, it will unscrew the bolt.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: need help!! broke 2 bolts
16 Feb 2012 23:37APE Jay wrote: Drill them with a left hand drill. Chances are pretty good when the drill starts biting, it will unscrew the bolt.
X2
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: need help!! broke 2 bolts
16 Feb 2012 23:44
Also, soak them with Kroil for a couple days first. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- Andy Lishious
-
- Offline
- User
-

Registered
- Posts: 33
- Thanks: 0
Re: need help!! broke 2 bolts
17 Feb 2012 00:21
This same thing happened to me last month when i was doing a top end rebuild... I drilled them out and helicoiled the jugs. Wasn't to bad, Scared the bajesus outa me though, It should all work out for ya man.
1981 Kawasaki kz750 E 160 pound rider
1973 Bultaco Alpina 250
1973 Bultaco Alpina 250
Please Log in or Create an account to join the conversation.
- 79kz1000*
-
Topic Author
- Offline
- User
-

Registered
- Posts: 89
- Thanks: 1
Re: need help!! broke 2 bolts
17 Feb 2012 01:11
Thanks for your advice. just wanted to make sure the jugs were junk!
79 kz 1000 ltd
76 kz 900
76 kz 900
The following user(s) said Thank You: Andy Lishious
Please Log in or Create an account to join the conversation.
- gwolever
-
- Offline
- User
-

Registered
- Posts: 237
- Thanks: 8
Re: need help!! broke 2 bolts
18 Feb 2012 01:03
The EDM is nice, but be prepared to pay for it. I had 3 broken bolts this summer for my engine rebuild, one of which had a broken extractor in it as well. $180 later with an EDM and it was like it never happened. Ouch.
1982 KZ1000 CSR
Please Log in or Create an account to join the conversation.
- porchev914
-
- Offline
- User
-

Registered
- Whats that? Half of my swingarm is missing?!?!?
- Posts: 2708
- Thanks: 19
Re: need help!! broke 2 bolts
18 Feb 2012 17:09
Outch is right! The shop I go to charges $20 per hole, much more livable
FRANKEN Z!
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
