FAR from kawasaki

  • Andy Lishious
  • Andy Lishious 's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 33
  • Thanks: 0

FAR from kawasaki

19 Feb 2012 01:49
#504985
Okay so this is far from Kawasaki but i own a 1973 bultaco alpina 250 and i have a compression release "2" spark plugs holes i also have a spare kawi coil do you thing i would gain more performance out of the 70's pig running 2 "hot" spark plugs? Andy
1981 Kawasaki kz750 E 160 pound rider
1973 Bultaco Alpina 250

Please Log in or Create an account to join the conversation.

  • steveo_4192003
  • steveo_4192003's Avatar
  • Offline
  • User
  • User
    Registered
  • 77kz650b-1
  • Posts: 213
  • Thanks: 1

Re: FAR from kawasaki

24 Feb 2012 13:54
#506115
I have never seen it done but from what I remember, having two plugs, one used by coil and the other open so when you foul a plug you can just switch the coil wire to the new plug and keen going with little down time. Your idea sounds cool but if its running at 200 + degrees with one coil it might burn up with extra heat and lack of lubrication being a two stroke.
1977 kz650b-1, 4-2exhaust systetm, pod filters ,jetted 112 main, 17.5 pilot

Please Log in or Create an account to join the conversation.

  • Andy Lishious
  • Andy Lishious 's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 33
  • Thanks: 0

Re: FAR from kawasaki

26 Feb 2012 10:16
#506415
I have some time on my hands just something to screw around with but your right about having 2 plugs in case 1 fouls but i think that was mainly a problem back in the day when they were using crap oil and crap plugs. I never fouled a plug im using amsoil dominator.
1981 Kawasaki kz750 E 160 pound rider
1973 Bultaco Alpina 250

Please Log in or Create an account to join the conversation.

  • KraZ900
  • KraZ900's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 42
  • Thanks: 1

Re: FAR from kawasaki

26 Feb 2012 15:14 - 26 Feb 2012 15:17
#506449
steveo_4192003 wrote: I have never seen it done but from what I remember, having two plugs, one used by coil and the other open so when you foul a plug you can just switch the coil wire to the new plug and keen going with little down time. Your idea sounds cool but if its running at 200 + degrees with one coil it might burn up with extra heat and lack of lubrication being a two stroke.
I think they both worked at the same time. Lets say if #1 was firing and #2 was reserve. Then in a time where the #1 would be fouled, then #2 would foul also. If they fired together then it decreases your chance of fouling with 2 weak sparks instead of one.

To Andy I would throw the coil on it, plug a hole, or just throw a dummy plug in it. As for how hot the plug needs to be. I would start out with a normal plug. Grab your bike. Find a hill. Then pin the throttle all the way up. At the top immediately pull the clutch and hit the kill switch. Pull the spark plug out and check the color. It should be a dry tan color. If it's dry and black too rich. If its wet and black mixture is way too rich and you probably didn't make it up the hill. If the plug is shiny and metallic it is way too lean. You'll be going back and forth with plugs a hotter plug might not foul as quick putting and lugging the bike on trails. But that's not what a two stroke is for. WOT WOT BbbbbbrrrrraaaaaawwwwWWWWWW!
"The Classic Flying W"
76 KZ900 LTD
Last edit: 26 Feb 2012 15:17 by KraZ900.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum